CORNING 6780-NP Руководство по эксплуатации - Страница 7
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Лабораторное оборудование CORNING 6780-NP. CORNING 6780-NP 13 страниц. Digital microplate and orbital shakers
Также для CORNING 6780-NP: Руководство по эксплуатации (10 страниц)
Печатать страницу
CORNING
LSE
DIGITAL MICROPLATE AND ORBITAL SHAKERS
RUN and TIME signal lights on. Shaker runs and counts down time from set value.
NOTE: YOU CANNOT MODIFY THE SET TIME DURING SHAKING, HOWEVER, YOU CAN STOP
THE UNIT WITH THE START/STOP BUTTON AND THEN RESET THE TIME.
POWER
If you want to change the RPM during shaking, push the encoder knob to put the shaker into
RPM set mode (RPM signal light will be on). Rotate the encoder right (+) or left (-) to set the
desired value. In the meantime, the RPM signal light will flash. When you stop rotating the
encoder knob, the signal light for RPM will stop flashing after 2 seconds.
POWER
When the run time has elapsed or when you press the START/STOP button, the display will
show "End" and the RUN light will flash. When shaker completely stops the set speed and
time will return to the last programmed values.
RUN
nx10 (RPM)
POWER
RUN
TIME
nx10 (RPM)
RUN
TIME
nx10 (RPM)
7
TIME
RPM
Push
Time/RPM
t (min)
RPM
Push
Time/RPM
t (min)
RPM
Push
Time/RPM
t (min)
USER'S MANUAL