Makita 3708FC Руководство по эксплуатации - Страница 2
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Электроинструмент Makita 3708FC. Makita 3708FC 16 страниц. Trimmer
Также для Makita 3708FC: Технические характеристики (2 страниц), Список деталей (3 страниц), Разбивка на части (3 страниц), Руководство по эксплуатации (12 страниц)
Печатать страницу
ENGLISH (Original instructions)
SPECIFICATIONS
Collet chuck capacity
No load speed (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual.
DOUBLE INSULATION
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible recycling
facility.
Intended use
The tool is intended for flush trimming and profiling of
wood, plastic and similar materials.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
Noise
The typical A-weighted noise level determined according
to EN60745:
Model 3708,3708F
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Model
-1
)
Overall length
Net weight
Safety class
equipment
and
) : 80 dB(A)
pA
3708 / 3708F
6 mm or 1/4"
35,000
308 mm
1.3 kg
END201-5
Model 3708FC
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode : rotation without load
its
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
ENE010-1
•
used in a preliminary assessment of exposure.
WARNING:
ENF002-2
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
ENG905-1
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
2
/II
) : 76 dB(A)
pA
Wear ear protection
) : 2.5 m/s
h
2
3708FC
6 mm or 1/4"
26,000
308 mm
1.3 kg
/II
ENG900-1
2
or less
ENG901-1