Makita 4323 Руководство по эксплуатации - Страница 5
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Электроинструмент Makita 4323. Makita 4323 17 страниц. Makita 4323 jig saw: specifications
Также для Makita 4323: Руководство по эксплуатации (2 страниц), Руководство по эксплуатации (19 страниц)
Печатать страницу
FUNCTIONAL
DESCRIPTION
1
1. Lock button
2. Switch trigger
1
1. Speed adjusting dial
CAUTION:
•
Always be sure that the tool is switched off and unplugged before
adjusting or checking function on the tool.
Switch action
002707
CAUTION:
•
Before plugging in the tool, always check to see that the switch trigger
actuates properly and returns to the "OFF" position when released.
2
To start the tool, simply pull the switch trigger. Release the switch trigger to
stop.
For continuous operation, pull the switch trigger and then push in the lock but-
ton.
To stop the tool from the locked position, pull the switch trigger fully, then
release it.
Speed adjusting dial
002710
For Model 4323 only
The tool speed can be infinitely adjusted between 500 and 3,100 strokes per
minute by turning the adjusting dial. Higher speed is obtained when the dial is
turned in the direction of number 6; lower speed is obtained when it is turned
in the direction of number 1.
Refer to the table to select the proper speed for the workpiece to be cut. How-
ever, the appropriate speed may differ with the type or thickness of the work-
piece. In general, higher speeds will allow you to cut workpieces faster but the
service life of the blade will be reduced.
Workpiece to be cut
Wood
Mild steel
Stainless steel
Aluminum
Plastics
CAUTION:
•
If the tool is operated continuously at low speeds for a long time, the
motor will get overloaded and heated up.
•
The speed adjusting dial can be turned only as far as 6 and back to 1. Do
not force it past 6 or 1, or the speed adjusting function may no longer
work.
006583
Number on adjusting dial
5 - 6
3 - 6
3 - 4
3 - 6
1 - 4
5