Avantco Equipment 177ID18SBSA Руководство пользователя - Страница 7

Просмотреть онлайн или скачать pdf Руководство пользователя для Диапазоны Avantco Equipment 177ID18SBSA. Avantco Equipment 177ID18SBSA 12 страниц. Double drop-in induction range

Печатать страницу

User Manual

Installation Instructions

Installation must conform to all applicable codes. Improper installation will void the manufacturer's warranty.

Do not obstruct or reduce the airflow of the ventilation openings on the sides, bottom, or the rear of the unit.

Blocking airflow could cause the unit to overheat.

Do not install near any combustible surfaces. There must be a minimum of 4" between the induction range

and any non-combustible surface to allow sufficient airflow around the unit. There must be at least ¾"

between the bottom of the induction range and the surface. Avoid placing on soft surfaces that could restrict

the airflow to the bottom of the unit. There must be at least 12" of clearance on the sides and back from

combustible surfaces.

Do not operate this product in high heat environments. Avoid placing this product near gas equipment. The

maximum ambient room temperature must not exceed 100F. Temperatures are measured in ambient air while

all appliances in the kitchen are in operation.

The power supply must comply with the rated voltage, frequency, and plug specified on the data plate and

must be grounded. Do not use an extension cord with plug and cord models.

This product conforms to UL-197 standards and requires it to be under an exhaust hood. A vertical distance

of not less than 48" shall be provided between the top of the appliance and filters or any other combustible

material. Exhaust installation must conform to applicable codes. The ranges are designed to operate only for

the voltages indicated on the serial plate.

As a precaution, persons using a pacemaker should stand back 12" from an operating unit. Studies have

shown that the induction element will not disrupt a pacemaker. Keep all credit cards, driver licenses and

other items with a magnetic strip away from an operating unit. The unit's magnetic field might damage the

information on these strips.