Avantco Equipment MX40 Руководство пользователя - Страница 3

Просмотреть онлайн или скачать pdf Руководство пользователя для Смеситель Avantco Equipment MX40. Avantco Equipment MX40 16 страниц. Commercial mixer

Печатать страницу

STANDARD ACCESSORIES

Standard Accessories

FIGURE 10

Item

Description

Flat Beater

Dough Hook

Wire Whip

Bowl

NOTES:

• Any agitator is easily installed by simply raising it onto the mixing axle, and the rotating it clockwise on the shaft

until it locks into place. To remove, raise the agitator on the shaft until it clears the lock and then rotate counter-

clockwise and lower.

• All of the accessories are precisely fitted to the bowl, have rounded corners, and are easily removed for cleaning.

Unpacking the Equipment

and Initial Setup

Carefully remove crating or packaging materials from the equipment. Models shipped on pallets are bolted to the

pallet. Bolts must be removed to safely separate the equipment from the pallet. Place the equipment on a flat surface

with sufficient space around the mixer to allow for safe cleaning and service. Plug only into grounded electrical outlets

matching the nameplate rated voltage. Do not use an extension cord with this equipment. Do not plug this equipment

into a power strip or multi-outlet power cord.

INSTALLATION:

1. Read this manual in its entirety prior to installation and operation. DO NOT install if you do not understand everything

in this manual.

2. Select a location for the mixer keeping in mind that:

• Surface must be level

• Location should be accessible for maintenance and service

• Location should offer adequate clearance for installing and removing agitators, bowls or attachments

• Location offers sufficient space for adding ingredients to the mixer

• Make sure that the rear ventilation outlet of the mixer is not blocked

www.AvantcoEquipment.com

STANDARD ACCESSORIES

ITEM

DESCRIPTION

QTY

Spatula

Dough Hook

Wisk

Bowl

NOTES:

• Any agitator is easily installed by sim-

ply raising it onto the mixing axle, and

the rotating it clockwise on the shaft

until into place. To remove, raise the

agitator on the shaft until it clears the

lock and then rotate counter-clockwise

and lower.

• All of tools are precisely fitted to the

bowl, rounded corners and easily

removable for cleaning.

SPANISH:

• Any agitator is easily installed by sim-

ply raising it onto the mixing axle, and

the rotating it clockwise on the shaft

until into place. To remove, raise the

agitator on the shaft until it clears the

lock and then rotate counter-clockwise

and lower.

• All of tools are precisely fitted to the

bowl, rounded corners and easily

removable for cleaning.

STANDARD ACCESSORIES

FIGURE 10

STANDARD ACCESSORIES

FIGURE 10

User Manual

FIGURE 10

OPERATION INSTRUCTION

ITEM

DESCRIPTION

Spatula

Dough Hook

Please ensure power supply matches your machine

Wisk

Please ensure power supply matches your machine.

Bowl

NEMA 5015P

110V

NOTES:

110V

• Any agitator is easily installed by sim-

ply raising it onto the mixing axle, and

the rotating it clockwise on the shaft

OFF

FOR CHANGING THE SPEED: Please stop machine first

until into place. To remove, raise the

agitator on the shaft until it clears the

before changing speed in order to avoid damage to the gear box

lock and then rotate counter-clockwise

FOR CHANGING THE SPEED: Please stop machine first

and lower.

before changing speed in order to avoid damage to the gear bo

• All of tools are precisely fitted to the

bowl, rounded corners and easily

removable for cleaning.

MIXING: According to the different mixing material.

Choose the different mixing devicews and speed.

SPANISH:

• Any agitator is easily installed by sim-

MIXING: According to the different mixing material.

ply raising it onto the mixing axle, and

Choose the different mixing devicews and

the rotating it clockwise on the shaft

until into place. To remove, raise the

agitator on the shaft until it clears the

A. Be suitable for mix and stir batter, eggs and work with

lock and then rotate counter-clockwise

in speed speed, working time isless than 15 minutes.

and lower.

A. Be suitable for mix and stir batter, eggs and work with

• All of tools are precisely fitted to the

in speed speed, working time isless than 15 minutes

bowl, rounded corners and easily

removable for cleaning.

B. Be suitable for mix and stir stuffing and raw material, and

work in middle speed, working time is less than 20 mins.

B. Be suitable for mix and stir stuffing and raw material, and

work in middle speed, working time is less than 20

C. Middle position is suitable for mixing dough, working time

is less than 30 minutes. Flour/ water quantity is 40%-50%.

C. Middle position is suitable for mixing dough, working time

is less than 30 minutes. Flour/ water quantity is

OPERATION INSTR

NEMA 5015P

110V

OFF

QTY

ITEM

DESCRIPTION

Spatula

ITEM

DESCRIPTION

Dough Hook

ITEM

DESCRIPTION

Spatula

Wisk

Spatula

Dough Hook

Bowl

Dough Hook

Wisk

Bowl

NOTES:

Qty

Bowl

• Any agitator is easily installed by si

speed.

NOTES:

ply raising it onto the mixing axle, a

• Any agitator is easily installed by si

the rotating it clockwise on the sh

NOTES:

ply raising it onto the mixing axle, a

until into place. To remove, raise t

• Any agitator is easily installed by si

the rotating it clockwise on the sh

agitator on the shaft until it clears t

ply raising it onto the mixing axle, a

until into place. To remove, raise t

lock and then rotate counter-clockwi

the rotating it clockwise on the sh

agitator on the shaft until it clears t

and lower.

until into place. To remove, raise t

lock and then rotate counter-clockwi

agitator on the shaft until it clears t

and lower.

• All of tools are precisely fitted to t

lock and then rotate counter-clockwi

bowl, rounded corners and eas

and lower.

• All of tools are precisely fitted to t

removable for cleaning.

bowl, rounded corners and eas

• All of tools are precisely fitted to t

removable for cleaning.

SPANISH:

bowl, rounded corners and eas

40%-50%.

• Any agitator is easily installed by si

removable for cleaning.

SPANISH:

ply raising it onto the mixing axle, a

• Any agitator is easily installed by si

the rotating it clockwise on the sh

SPANISH:

ply raising it onto the mixing axle, a

until into place. To remove, raise t

• Any agitator is easily installed by si

the rotating it clockwise on the sh

agitator on the shaft until it clears t

ply raising it onto the mixing axle, a

until into place. To remove, raise t

lock and then rotate counter-clockwi

the rotating it clockwise on the sh

agitator on the shaft until it clears t

and lower.

until into place. To remove, raise t

lock and then rotate counter-clockwi

agitator on the shaft until it clears t

and lower.

• All of tools are precisely fitted to t

lock and then rotate counter-clockwi

bowl, rounded corners and eas

and lower.

• All of tools are precisely fitted to t

removable for cleaning.

bowl, rounded corners and eas

• All of tools are precisely fitted to t

removable for cleaning.

bowl, rounded corners and eas

removable for cleaning.

Please ensure power supply m

FOR CHANGING THE SPEED:

before changing speed in order t

FOR CHANGING THE SPEED:

before changing speed in order t

MIXING: According to the diff

Choose the different mixing d

MIXING: According to the diff

Choose the different mixing d

A. Be suitable for mix and stir

in speed speed, working time

A. Be suitable for mix and stir

in speed speed, working time

QTY

B. Be suitable for mix and stir

QTY

work in middle speed, working

B. Be suitable for mix and stir

work in middle speed, working

C. Middle position is suitable fo

is less than 30 minutes. Flour/

C. Middle position is suitable fo

is less than 30 minutes. Flour/

mins.