Makita 4351T Техническая информация - Страница 4

Просмотреть онлайн или скачать pdf Техническая информация для Электроинструмент Makita 4351T. Makita 4351T 15 страниц. Jig saw
Также для Makita 4351T: Технические характеристики (2 страниц), Руководство по эксплуатации (13 страниц), Руководство по эксплуатации (13 страниц), Руководство по эксплуатации (9 страниц)

epair

[5] Disassembling Gear housing cover section

1. After separating Safety wire from Gear housing cover, remove four 4x16 Tapping screws CT .

Gear housing cover is separated from Gear housing as illustrated in Fig. 6.

Fig. 6

Tapping screws

CT 4x16

2. Remove Stop ring E-3 with slotted screwdriver.

Push Slider to the lower dead point. (Fig. 7)

Fig. 7

Slider

Pin 4

Rod

3. Slide Pin 4 in order to disconnect Rod with Slider. And then, pull out Rod from Gear housing cover.

Separate Linear guides from Gear housing by removing four M4x10 Pan head screws .

Pin 4, Slider and Leaf spring are disassembled from Gear housing cover. (Fig. 8)

Fig. 8

Linear guides

Slider

Pin 4

Note: When reassembling, be sure to the direction of Leaf spring illustrated above.

Gear housing cover

Gear housing

Stop ring E-3

Rod

Gear housing cover

Rod

Slider in the lower

dead point

Linear guides

Leaf spring

Slider

Pin 4

Pan head

screws M4x10

P 4 / 15