Makita 5630DWA Руководство по эксплуатации - Страница 6
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Электроинструмент Makita 5630DWA. Makita 5630DWA 20 страниц. Equipped with electric brake
Также для Makita 5630DWA: Список деталей (2 страниц)
Печатать страницу
Do not use dull or damaged blade. Unsharpened or improperly set blades
produce narrow kerf causing excessive friction, blade binding and KICKBACK.
Blade depth and bevel adjusting locking levers must be tight and secure before
making cut. If blade adjustment shifts while cutting, it may cause binding and
KICKBACK.
Use extra caution when making a "Pocket Cut" into existing walls or other
blind areas. The protruding blade may cut objects that can cause KICKBACK.
NEVER place your hand or fingers
behind the saw. If kickback occurs,
the saw could easily jump backwards
over your hand, possibly causing
severe injury.
Fig.
3
12.
Adjustments. Before cutting be sure depth and bevel adjustments are tight.
13. Avoid Cutting Nails. Inspect for and remove all nails from lumber before
cutting.
14. When operating the saw, keep the
cord away from the cutting area and
position
it
so that
it
will not be caught
on the workpiece during the cutting
operation.
Operate w i t h proper hand support,
proper workpiece support,
and
supply cord routing away from the
work area.
A typical illustration of proper hand
support, workpiece support, and
supply cord routing.
WARN IN
G
:
Fig.
1
It is important t o support the workpiece properly and t o hold the saw firmly
t o prevent loss of control which could cause personal injury. Fig. 4 illustrates
typical hand support of the saw.
6