Makita 7104L Техническая информация - Страница 2

Просмотреть онлайн или скачать pdf Техническая информация для Электроинструмент Makita 7104L. Makita 7104L 8 страниц. 12-1/4" planer, blade sharpener, plate joiner, chain mortiser, blower, heat gun
Также для Makita 7104L: Руководство по эксплуатации (4 страниц), Брошюра (1 страниц), Руководство по эксплуатации (13 страниц), Руководство по эксплуатации (13 страниц)

Печатать страницу

epair

CAUTION: For safety before repair/maintenance;

1)Unplug machine. 2)Remove cutter chain, chain bar, Hex. bolt M10 and Washers.

[1] NECESSARY REPAIRING TOOLS

Code No.

1R275

Type 94 field insert jig

Gear extractor, large

1R045

Spring pin extractor 4.0

1R308

1R309

Spring pin extractor 5.0

Spring pin extractor 6.0

1R310

[2] LUBRICATION

See Fig. 1.

1. Apply 10g of Makita grease N No.1 for the teeth of Helical gear 47 and put some amount of Makita grease N No.1 on

the rubbing surfaces of Motor housing complete and Rotor holder for their smooth pivot action. Refer to

2. Put a little amount of machine oil on Spring pin 5-40, two slide poles of Base complete, the threads of M14 Screw,

inside of Ring 9 and both sides of Sleeve 9 near Clamp lever, the inside of Sleeve 9 near Lever B complete, Slide bar

and Guide pole. Refer to

3. Put a little amount of adhesive on the threads of M6x12 + Countersunk head screw for setting Ball bearing 1008LL to

Chain bar. Refer to

marks.

Fig. 1

Makita grease N No.1 (Part No. 042017-7A, 2.5kg/set)

Machine oil

Adhesive: 0.12g Three bond 1342

(Makita Neji lock super TB1342:

Part No. 045017-6A)

Sleeve 9: Inside and outside

Description

marks.

Chain bar

+ Countersunk

head screw M6x12

Ball bearing

1008LL

Helical gear 47

Rotor holder

Ring 9: Inside

Lever B complete

Sleeve 9: Inside

Removing Sprocket 4

Holding Sprocket 4 to unscrew Hex nut M10

Removing 4.0mm diameter Spring pins

Removing 5.0mm diameter Spring pins

Removing 6.0mm diameter Spring pins

Spring pin 5-40

Motor housing

complete

Screw M14

Clamp lever

Slide bar

Use for

Slide poles of Base complete

Guide pole

P 2 / 8

marks.