KitchenAid Superbra KUDA220T Руководство по установке - Страница 8

Просмотреть онлайн или скачать pdf Руководство по установке для Посудомоечная машина KitchenAid Superbra KUDA220T. KitchenAid Superbra KUDA220T 8 страниц. Undercounter dishwasher

Печатать страницу

Custom-made

panels

Personal Injury

Handle metal edges of panels

carefully.

Cut metal edges may

cause personal Injury or

damage to other materials.

1/4"

THK,-i_

13/16"*

23 9/16"

1/4"

6 5/8"

If the dishwasher

is not operating

properly...

Check these points:

• Is the door closed tightly and

latched securely?

• Has the cycle been set correctly

to start the dishwasher?

• Is the water turned on?

• Has a house fuse blown?

• Has electrical power been

interrupted?

Note: If the motor has stopped

because of overload, it will

automatically

reset itself within a

few minutes.

If after checking these points the

dishwasher still does not run or

complete a cycle, call for service.

*For Models: KUDA220T and

K UDA22ST- 17-7/16"

Custom wood or other materials

should be 1/4" thick. Thinner

materials will need to have a spacer

panel installed behind custom

panel.

If custom panel is more than

1/4" thick, the outer edge

will need to be routed as shown.

Custom wood panels need a

waterproof protective finish applied

to all sides and edges of panel.

After custom panels are installed,

check the door tension.

The door

should be counterbalanced

so it

doesn't fall open or close when

opened.

If the door closes from an

open position, adjust the door-spring

brackets upward to a different hole.

If door falls open too quickly, move

spring bracket downward.

If custom

panels are heavy, heavy-duty door

springs are available from your

KitchenAid dealer.

Printed in U.S.A.

Part No. 4171206

Prepared by KitchenAid ®,St. Joseph, Michigan 49085