Makita 9218SB Руководство по эксплуатации - Страница 8

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Электроинструмент Makita 9218SB. Makita 9218SB 13 страниц. Disc sander
Также для Makita 9218SB: Разбивка на части (2 страниц), Руководство по эксплуатации (8 страниц), Руководство по эксплуатации (10 страниц)

Печатать страницу
Makita 9218SB Руководство по эксплуатации
1. Limit mark
1
2
1. Screwdriver
2. Brush holder cap
ACCESSORIES
8

Replacing carbon brushes

001145
Remove and check the carbon brushes regularly. Replace
when they wear down to the limit mark. Keep the carbon
brushes clean and free to slip in the holders. Both carbon
brushes should be replaced at the same time. Use only iden-
tical carbon brushes.
1
Use a screwdriver to remove the brush holder caps. Take out
003422
the worn carbon brushes, insert the new ones and secure
the brush holder caps.
To maintain product SAFETY and RELIABILITY, repairs, any
other maintenance or adjustment should be performed by
Makita Authorized or Factory Service Centers, always using
Makita replacement parts.
CAUTION:
•
These accessories or attachments are recommended for
use with your Makita tool specified in this manual. The
use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding these
accessories, ask your local Makita service center.
•
Rubber pad
•
Abrasive discs
•
Lock nut
•
Lock nut wrench 28
•
Wrench 17
•
Grip 36