ALIBI ALI-HVR5016H Руководство по быстрой настройке - Страница 6
Просмотреть онлайн или скачать pdf Руководство по быстрой настройке для DVR ALIBI ALI-HVR5016H. ALIBI ALI-HVR5016H 9 страниц. 16-channel hd-tvi digital video recorder
Печатать страницу
Click the Next button to open the date and time settings window.
5.
6.
In the date and time setup window, click the field you want to change, then use the drop-down list or setup aid to select the
appropriate values. Click Next to confirm your settings or Cancel to discard them and open the network setup Wizard window.
In the Network setup Wizard window, click the field value you want to change, then use the pop-up aid to enter a new value. By
7.
default, the DVR uses DHCP (Dynamic Host Configuration Processor) to acquire compatible (dynamic, changeable) network settings
from a network DHCP server.
Generally, it is preferable to setup the DVR with a fixed network settings, if possible, to assure the DVR has an unchanging IP address
for remote login. To enable fixed network settings, un-check the Enable DHCP box, then edit the appropriate fields to change the
settings. Consult with your network administrator to determine the best network settings for your DVR. When finished, click Next.
6
www.Observint.com
8.
Click Next after you configured the network parameters. In the screen shown below, you can change the Server Port, HTTP port,
and RSTP port if using these port numbers interferes with other devices on your network. In most cases, they will not. To change a
port number, click the field, then enter the new number using the pop-up soft keyboard. Refer to the ALI-HVR5016H 16-Channel
HD-TVI Digital Video Recorder User Manual provided electronically with your systems.
In the screen above, you can also enable UPnP™ (Universal Plug and Play) and DDNS, Dynamic DNS to easily access your DVR from
outside the local network (i.e., the Internet). If setting up DDNS, the parameters you must configure depend on the DDNS server you
use. Refer to the ALI-HVR5016H 16-Channel HD-TVI Digital Video Recorder User Manual provided electronically with your
systems. Click Next to continue.
9.
Click Next after you configured the network parameters. The HDD management Wizard window will open. If a new DVR is shipped
with a pre-configured HDD, nothing needs to be done in this window. If you installed an HDD or replaced the HDD, select (check the
box for) the HDD, then click Init to setup the disk for the DVR. NOTE: Init will erase all data from the disk. When the initialization is
complete, click Next to continue.
© 2014 Observint Technologies. All rights reserved.