HIKVISION DS-7604 Series Краткое руководство по эксплуатации - Страница 2

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для DVR HIKVISION DS-7604 Series. HIKVISION DS-7604 Series 6 страниц.

select the HDD from the list to initialize it. Initializing the
HDD will format and remove all data from it.
14. After the HDD has been initialized, click the OK button
which will take you back to the Setup Wizard window.
15. Click the Next button. This will take you to the Record
Settings Window.
16. To enter the Record
Settings window,
click the Enter
button.
17. Select the Schedule
tab.
18. Click the Edit button. This will open up a new recording
schedule.
19. Check both the
Enable Schedule
and All Day
checkbox. This will
enable the
recording schedule
and have it record
continuously all
day.
20. Click the OK button.
This will take you
back to the
Schedule tab. To
copy the schedule
to a different channel, select the channel or all under
Copy To and click the Copy button.
21. Click the Next
button.
This will take you
to the Network
Settings window.
22. To configure
network settings, click the Enter button.
23. Enter the IP Address, Subnet Mask and Default
Gateway.
24. Click the OK button to return to the Setup Wizard.
25. Click the Next button.
This will take you
to the Camera
Management
window.
26. Select Add to add IP
camera, and click OK
2
Quick Start Guide - DS-7604 Series DVR
to return to Setup Wizard.
27. If all the settings are entered as desired, click the Done
button to finish and exit the Setup Wizard.
Congratulations! You've completed the Setup Wizard. The
next step in the initial setup process is to setup the system
date and time.
Setting Date & Time
It is extremely important to setup the system date and time to
accurately timestamp recordings and events.
To setup date and time:
1. Enter General Settings
menu by clicking
Menu> Setting >
General.
2. Enter the correct date
and time under
System Time.
3. Click the Apply button to save the setting.
Playback
Playback from Search
To playback files from a general search:
1. Enter into the Video
Search menu by clicking
Menu > Video Search.
2. Select General tab, and
Set the search parameters
by selecting cameras to
search, video/file type and the start/end time.
3. Click the Play button to
start playback of all the
files found with the
specified search criteria or
click the Search button to
bring up the list of search
results. After search results are presented, select the file
you would like to playback and press Play to enter
synchronous playback cameras selection.
4. Recordings will automatically be played back in the