BEROTEC CUMPAN Руководство пользователя - Страница 4

Просмотреть онлайн или скачать pdf Руководство пользователя для Измерительные приборы BEROTEC CUMPAN. BEROTEC CUMPAN 8 страниц. Ktm exc 250-f exc 350-f 250 exc tpi 300 exc tpi / husqvarna fe 250 te 300i fe 350 tx 300i te 250i / gasgas ec 250f ec 300 ec 350f ex 250 ec 250 ex 300
Также для BEROTEC CUMPAN: Руководство пользователя (8 страниц), Руководство пользователя (4 страниц), Руководство пользователя (9 страниц), Руководство пользователя (4 страниц), Руководство пользователя (4 страниц)

B E R O T E C

T e m p e r a t u r e d e t e c t i o n

The CUMPAN has two separate temperature detections:

The ambient temperature

Sensor integrated in the supply line of the device, approx. 40mm from the

housing away

Adjustable temperature warner warns of icy conditions

The engine temperature

Sensor included in scope of delivery

Recording of the engine temperature either at the oil/cooling water circuit or

engine housing

Adjustable temperature warner warns of overheating

NOTE

speeds in this temperature range.

R P M d e t e c t i o n a n d s h i f t f l a s h

The speed is determined and evaluated via the so-called „crankshaft position sen-

sor". In every modern combustion engine, the position of the crankshaft must be per-

manently determined in order to coordinate ignition timing and injection. Therefo-

re, all the necessary data is already available. All that needs to be done is to tap the

signal cable of the installed sensor. The electronics of the vehicle are not affected.

A list with connection examples can be found on our website. This list will be extended

continuously. The one-time adjustment to the correct sensor is done in the menu of the

CUMPAN. This is done by increasing or decreasing the number of „pulses per crankshaft

revolution". There are already preset values stored, which are suitable for most vehicles.

An integrated shift flash can be set under engine temperature control. The CUMPAN effec-

tively warns of damaging speeds when the engine is cold.

The engine temperature is not displayed below 10°C for tech-

nical reasons. The engine should not be loaded by too high

CUMPAN

Deutsch