ALIBI ALI-NVR3108 Руководство по быстрой настройке - Страница 3

Просмотреть онлайн или скачать pdf Руководство по быстрой настройке для Сетевое оборудование ALIBI ALI-NVR3108. ALIBI ALI-NVR3108 12 страниц.

If you are using Cat 5e or Cat 6 copper (Ethernet) cable to connect your cameras to the NVR, or other cameras to the LAN, the cable distance

from the NVR (or switch on the LAN) should not exceed 330 feet (100 meters). If a longer cable run is required, the use of an active hardware

device such as a repeater or switch is necessary.

Place the NVR in a location that is secure, well ventilated and clean. The NVR should be positioned such that the back panel connectors are

accessible and the ventilation holes on the sides and top and the fan outlet on the back are not blocked.

Step 3. Install a monitor, mouse, power

For the following steps, refer to the back panel photo above for the location of connectors.

Install and setup your monitor in accordance with the instructions provided with the monitor. Do not power it on at this time.

Cable the HDMI or VGA connector to your monitor's VGA or HDMI input. The HDMI interface provides the best performance.

Plug the mouse into the USB connector on the front or back of the NVR.

If you plan to access your NVR remotely, or configure your NVR to transmit alerts, email, etc. to external servers, plug a drop cable from

your local area network (LAN) into the RJ45 LAN connector on the back of the NVR.

Connect the power cord to the power connector on the back panel of the NVR, and then into a UPS (preferred) or surge protector.

NOTE

Do not power on the NVR at this time.

Step 4. Connecting it together – initial system setup

Plug the LAN cables from the cameras into the POE RJ45 connectors on the back of the NVR.

If other cameras to be monitored by the NVR will network to it through the LAN, plug their Ethernet cables into a switch (router) on

the LAN and power on those cameras. (Power to other cameras on the LAN may be provided through a PoE switch if the camera is PoE

capable, or through a separate cable and power adapter).

Power on the NVR using the power on / off (I / O) switch on the back panel.

Power on the monitor.

Some monitors have multiple inputs such including VGA ,HDMI, BNC, etc. If you are using this kind of monitor, configure your monitor to

NOTE

display the input connected to your NVR (HDMI or VGA).

Power on the NVR. Normally, an Alibi logo splash screen appears within 2 minutes. A secondary flash screen will appear showing the

status of the HDDs installed in the NVR.

www.Observint.com

After the Alibi splash screen appears (see above), the NVR will check the status of HDDs installed within the chassis, and show the

show icons on the screen indicating their status. A green check mark on the icon indicates that the associated HDD is operating

normally. If you installed new (or uninitialized) HDDs in the chassis before running the Wizard, those HDDs must be initialized before

use. HDD initialization can be performed within the wizard and within the firmware menu system.

Following the splash screen, a monitor resolution screen may appear. Open the drop down list and select the monitor resolution you

prefer, then click OK.

The Setup Wizard can assist you in making important configuration settings in NVR. Click Next button on the Wizard window to open

the Login window.

The configuration settings presented in the setup Wizard can also be made and changed using the Menu system. For more information, refer

NOTE

to the ALIBI Embedded Network Video Recorder Firmware V3.3.4 User Manual available for download from your vendor.

The initial screen encourages you to change the NVR default password (admin user default password = 1111) to improve the security

of your security system. To change the password at this time, click Yes.

Enter the current admin password in the Old Password field (see the screen above - right). To do that, click anywhere in the

entry field, click the characters of the old password using the virtual keyboard, and then click the "Enter" key

( 8 )in the lower right corner of the keyboard.