Garde Ruhla Business Alarm Инструкция по эксплуатации - Страница 2

Просмотреть онлайн или скачать pdf Инструкция по эксплуатации для Смотреть Garde Ruhla Business Alarm. Garde Ruhla Business Alarm 2 страницы.

Печатать страницу

Alarm function:

Setting the alarm time

The alarm time can only be set in alarm mode. To get there, repeatedly press the button [mode] until the LCD displays [7:00

than 8 s until the bell appears in the LCD, a signal sounds and the hour display flashes. Now use button [A] to set the desired alarm time. In order to set the

minutes, press once on button [B] - the minute display flashes. Use button [A] to set the minutes. In order to save the set alarm time, press the button [mode].

When activated (bell in the LCD in all watch functions), the alarm signal will then sound. The alarm sounds for a maximum of 30 s and can be shut off in any

mode using the buttons [A], [B] or [mode]. The alarm sounds at the same time every 24 hours.

Activation and deactivation

The alarm can only be activated and deactivated in alarm mode. To do this, hold button [B] for longer than 3 s. There will be a brief confirmation signal and the

bell will appear in the LCD. Deactivation is carried out in the same way as activation. The alarm function is deactivated when a longer signal sounds and the bell

disappears.

Calendar week/year:

Select the current calendar week, the year and the weekday with calendar day by brief, repeated pressing of the button [mode]. The calendar and weekday are

displayed in the upper LCD, while the calendar week and year are shown in the lower LCD.

Day / date display:

The calendar day and weekday are always displayed in the small, upper LCD in time/time zone mode, stopwatch mode, alarm setting mode and in business mode

(weekday-CW-year). When the day/date mode is activated, the display in the small LCD switches to the time (h-min) and to the weekday and date in the large,

lower LCD.

Radio reception status display:

The radio reception display can only be shown in the lower LCD in time/time zone mode (factory setting) by pressing button [B] for longer than 5 s. The LCD

display switches to time zone display [

radio reception was successful. A flashing radio mast denotes disturbed radio reception – the watch was not synchronised. At this moment, the watch's internal

receiver is activated and the watch attempts to locate the DCF signal. During this, the flashing radio mast is hidden after approx. 100 s. Nevertheless, the watch

remains (max. 7 minutes) in radio reception. Once radio reception has been established successfully, the radio mast will be displayed as a constant symbol in the

LCD for 60 s after pressing button [B].

Switch in summer/winter time:

When the clocks move forwards or backwards in summer/winter time, your watch will be switched automatically to the correct time between 2 and 3 a.m.

Summer time display:

The summer time display is shown in the large, lower LCD display during

Manual correction of the hands:

If it is necessary to set the watch manually (hands do not display the correct time, despite radio reception), first set [h-min-s] in the lower LCD by pressing the

button [mode]. Now press and hold button [B] for longer than 8 s until [AD 12] appears in the LCD. Once the button has been released, the hands rotate rapidly

and automatically come to a halt.

You can now move the hands as follows:

Press button [A] briefly = single step

Press button [A] for longer = increased hand rotation speed

Hold button [A] = switch to rapid hand movement – end by briefly pressing button [A]

If you have switched the hands to rapid rotation, you must stop them sufficiently in advance [11:59 50] in order to move the hands in single steps to the precise 12

o' clock position. Once the hands have stopped, the LCD flashes the [RC] symbol and the time symbol signal is received. When the radio signal has been received

successfully, the hands move rapidly to the current time.

Restarting after replacing batteries:

]

[

All segments

are displayed in the lower LCD after the new battery CR1620 has been inserted. In order to set the hands to the 12 o' clock position,

8888

88 88 88 88

please proceed as described in the section Manual correction of the hands.

Battery status display:

The battery symbol is always displayed in the lower LCD. If the battery symbol flashes, it indicates that the battery must be replaced. In order to prevent batteries

leaking and damaging your watch, please make sure you have the battery replaced by a specialist dealer inside of 2 the next weeks. To reset your watch, please

refer to item:

Restart after replacing batteries

Replacing the batteries (CR1620):

Always take your watch to a specialist dealer to replace the batteries.

Only use new, high-quality batteries of the type "CR1620". Failure to adhere to this stipulation can severely damage your watch, as the batteries may leak.

Have spent batteries removed immediately from your watch in order to prevent damage.

Note:

Please adhere to official regulations governing the disposal of batteries!

Do not dispose of batteries in domestic waste. Please return spent batteries to your local dealer or a hazardous waste and battery collection point. Spent batteries

must never be opened, short-circuited or thrown into a fire.

Linked strap:

You need special tools to adjust the titanium strap. Please contact a specialist dealer in order to prevent damage.

] in the seconds' display and the radio mast display (constant or flashing). A constant radio mast confirms that the last

0 0

summer time.

-2-

]. Now hold button [A] for longer