Makita BTW070Z Руководство по эксплуатации - Страница 6
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Электроинструмент Makita BTW070Z. Makita BTW070Z 16 страниц.
Печатать страницу
FUNCTIONAL
DESCRIPTION
2
1. Battery cartridge
2. Button
Indicating lamp
F Capacity
(C)
E
orange
Indicating lamp
E
F
orange
6
CAUTION:
•
Always be sure that the tool is switched off and the
battery cartridge is removed before adjusting or
checking function on the tool.
Installing or removing battery cartridge
001251
•
To remove the battery cartridge, withdraw it from the tool
while pressing the buttons on both sides of the cartridge.
•
To insert the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
1
it into place. Always insert it all the way until it locks in
place with a little click. If not, it may accidentally fall out
of the tool, causing injury to you or someone around you.
•
Do not use force when inserting the battery cartridge. If
the cartridge does not slide in easily, it is not being
inserted correctly.
Checking the remaining battery capacity
001254
When charging
When the charging begins, the first (far left) indicating lamp
80% - 100%
begins to flicker. Then, as charging proceeds, the other
60% - 80%
lamps light, one after the other, to indicate the battery capac-
40% - 60%
ity.
10% - 40%
0% - 10%
When using
When the tool is switched on, the lamps will light to indicate
Capacity
the remaining battery capacity. When the tool is switched off,
the light goes out after approx. 5 seconds. If the battery has
80% - 100%
60% - 80%
not been used for a long time, or is needed refresh charging,
40% - 60%
the orange lamp begins to flicker. Use Makita refreshing
10% - 40%
adapter to refresh the battery.
0% - 10%
CAUTION:
•
A battery cartridge extracted from the charger that has
been unplugged with the battery cartridge inserted does
not work even if it is inserted in the tool. At this time,
recharge it for about five seconds before use.