Makita DCO140 Техническая информация - Страница 2
Просмотреть онлайн или скачать pdf Техническая информация для Электроинструмент Makita DCO140. Makita DCO140 8 страниц. Cordless cut-out tool
Также для Makita DCO140: Руководство по эксплуатации (13 страниц), Руководство по эксплуатации (13 страниц)
Печатать страницу
R
epair
CAUTION: Repair the machine in accordance with "Instruction manual" or "Safety instructions".
[1] NECESSARY REPAIRING TOOLS
Code No.
Description
1R027
Bearing setting pipe ø18-ø10.2
1R029
Bearing setting pipe ø23-ø15.2
1R040
Armature holder 50 set for use with Vise removing Armature
1R165
Ring spring setting tool B
1R232
Pipe 30
1R258
V block
1R279
Round bar for arbor ø5-50
1R286
Round bar for arbor ø12-50
1R291
Retaining ring S and R pliers
1R383
Armature positioning jig
[2] DISASSEMBLY/ASSEMBLY
[2]-1. Armature
DISASSEMBLING
(1) Remove Holder caps from Housing set by prying them up with a thin slotted screwdriver. (Fig. 1)
(2) Remove Carbon brushes.
(3) Loosen M4x8 Thumb screw, and then slide Shoe plate in direction of arrow 1 , after that, remove Shole plate in
direction of arrow 2 . (Fig. 2)
Note: It is not necessary to separate the screw from the machine.
(4) Remove M4x8 Countersunk head screw. Shoe support with M4x8 Thumb screw and Shoe plate are removed. (Fig. 3)
(5) Remove Collet nut with the removed Shoe plate, and then separate Collet cone from Spindle complete. (Fig. 4)
(6) Remove four 4x25 Tapping screws, and then separate Armature with Bearing box complete from Housing set. (Fig. 5)
Fig. 1
Holder cap cover
Thin slotted screwdriver
Fig. 4
Shoe support with
M4x8 Thumb screw
M4x8 Countersunk
head screw
removing Ball bearing 6002DDW
pressfitting Spindle complete
removing Ball bearing 6002DDW
removing Spindle complete
removing Armature
removing Armature
removing Spindle complete
removing Retaining rings R-32 and S-15
placing Armature at the precise position when mounting it to
Bearing box complete
Fig. 2
M4x8 Thumb screw
2
Fig. 5
Shoe plate
Housing set
Use for
Fig. 3
Shoe plate
M4x8 Countersunk
head screw
1
Armature
4x25 Tapping
screw (4 pcs.)
P 2/ 8
Shoe support
M4x8 Thumb screw
Bearing box complete