HIKVISION DS-9104HFI-ST series Краткое руководство по эксплуатации - Страница 6

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для DVR HIKVISION DS-9104HFI-ST series. HIKVISION DS-9104HFI-ST series 19 страниц. Ds-9100hfi-st series

Печатать страницу
Quick Operation Guide of DS-9100HFI-ST Series DVR

Rear Panel

No.
Item
1
VIDEO IN
2
LOOP OUT
3
VIDEO SPOT OUT
4
VIDEO OUT
5
AUDIO OUT
6
LINE IN
7
AUDIO IN
8
AUDIO IN
9
RS-232 Interface
10
VGA
11
HDMI
12
eSATA (Optional)
13
LAN Interface
14
Termination Switch
RS-485 Interface
15
Controller Port
ALARM IN
ALARM OUT
16
GROUND
17
AC 100V ~ 240V
18
POWER
Description
BNC connector for analog video input.
BNC connector for video loop output.
BNC connector for video output.
BNC connector for video output.
1. When both HDMI and VGA are connected, it is used for live view
only;
2. When either HDMI or VGA is connected, it is used as the spot video
output for live view, playback, recording and PTZ controls;
3. When neither HDMI nor VGA is connected, it is used as the main
video output for live view and menu operations.
RCA connector for audio output. This connector is synchronized with
VIDEO OUT.
RCA connector for audio input.
RCA connector for audio input.
DB26 connector for audio input.
Connector for RS-232 devices.
DB9 connector for VGA output. Display local video output and menu.
HDMI video output connector.
Connects external SATA HDD, CD/DVD-RM.
Connector for LAN (Local Area Network).
RS-485 termination switch.
Up position is not terminated.
Down position is terminated with 120Ω resistance.
Connector for RS-485 devices. T+ and T- pins connects to R+ and R-
pins of PTZ receiver respectively.
D+, D- pin connects to Ta, Tb pin of controller. For cascading devices,
the first DVR's D+, D- pin should be connected with the D+, D- pin of
the next DVR.
Connector for alarm input.
Connector for alarm output.
Ground (needs to be connected when DVR starts up).
AC 100V ~ 240V power supply.
Switch for turning on/off the device.
5