Garden Controls LIGHT TIMER Руководство пользователя - Страница 2

Просмотреть онлайн или скачать pdf Руководство пользователя для Блок управления Garden Controls LIGHT TIMER. Garden Controls LIGHT TIMER 2 страницы.

Plug equipment into output cord (piggy back cord).

Electrical Specifications :

Load: 120V 12A (1 Light Switcher Trigger Cord or

1x 1000W ballast or 2x 600W ballasts).

5-ft Piggy Back Cord.

The Status Led will be BLINKING during the ON / OFF cycles to indicate the

remaining time (in hours) until the beginning of next cycle (transition from ON to OFF-cycle or from OFF to ON-cycle).

The indicator is blinking in multiple of 5 pulses.

Examples:

• To indicate 7 remaining hours

The Status Led will blink in this sequence: 5 pulses, one short pause, 2 pulses and one long pause, repeatedly.

• To indicate 3 remaining hours

The Status Led will blink in this sequence: 3 pulses and one long pause, repeatedly.

Note: If the Status Led indicates a remaining time of 3 hours, it means the actual remaining time is between 2 and 3 hours. Dur-

ing the last hour, the STATUS blinks only once between each long pause.

STATUS INDICATOR OFF

Indicates the controller has detected an error on the internal clock. The output will be off as long as the indicator is steady OFF. Feel free to

STATUS INDICATOR INFORMATION (PULSE)

TROUBLESHOOTING

For Warranty & Customer Service

Please visit www.gardencontrols.com or contact us

Clock and Rechargeable Backup Battery Specifications:

Clock Accuracy: time will drift less than 15 minutes

in a year.

Power Outage Duration: Internal Clock will maintain

ON/OFF cycles for a minimum of 48 hours during a

power outage.

Battery Recharge Time: Internal Battery is fully charged

in less than 30 minutes.