Corsa 14248 Инструкция по установке - Страница 4

Просмотреть онлайн или скачать pdf Инструкция по установке для Вентиляционная вытяжка Corsa 14248. Corsa 14248 4 страницы. Cat-back exhaust system for chevrolet avalanche 2007; chevrolet avalanche 2008; chevrolet suburban 2007; chevrolet suburban 2008; gmc yukon xl 2008; gmc yukon xl 2007; chevrolet tahoe 2007; chevrolet tahoe 2008; gmt900 2008; gmt900 2007

Печатать страницу

FIG. S

4) Replace the heat shield using a 15mm socket and ratchet.

5) Slide a 3" TORCA clamp over the tip assembly and place the tip onto the end of the tailpipe.

Pre-tighten the clamp at this time. (See Fig's V, W, X, Y & Z)

6) Starting from the front of the CORSA exhaust system tighten all TORCA

clamps to

45 ft-lbs

7) Replace the spare tire and its components to the pre-removal condition.

8) It is strongly suggested that all clamps be checked and

tightened after road testing the vehicle once the system has cooled.

FIG. W

NOTE:

During cold weather start-ups, you may experience an exhaust

sound that is deeper and louder in tone than usual. This is temporary

and will diminish to normal levels once your engine has reached its

normal operating temperature.

NOTE:

Immediately following the installation of your CORSA exhaust

system, you may experience a trace of smoke after initial start-up.

DO NOT be alarmed. The smoke is caused by the burning of a small

amount of forming oil residue used in the manufacturing process.

CORSA PERFORMANCE EXHAUST

FIG. T

using a torque wrench.

FIG. X

Exhaust System Installation: Cat-Back Exhaust System

2007-08 Avalanche/Suburban/Yukon XL 5.3L GMT900

Single Side Exit

Twin Pro-Series 4.0" Tips / SPORT PN 14246 / TOURING PN 14247

Hydroformed Oval Tip / SPORT PN 14248 / TOURING PN 14249

FIG. Y

FIG. U

FIG. V

FIG. Z

EXHAUST SYSTEMS