Corsa 14864 Руководство по установке - Страница 2

Просмотреть онлайн или скачать pdf Руководство по установке для Автомобильные аксессуары Corsa 14864. Corsa 14864 7 страниц. Cat back exhaust system

Factory Exhaust System Removal:

1. Beginning at the flange connection of the catback, use the ratchet, 14mm socket, and 12mm wrench to remove

the two spring bolts. (Fig A) Support the catback with a jack stand or similar device.

2. Using grommet pullers or a similar device, remove the hanger from the rubber grommet near the rear

differential. (Fig B)

Note: The use of a soap and water solution may aid in the removal of hangers.

3. Using grommet pullers or a similar device, beginning on the driver's side of the rear muffler, remove the two

muffler hangers from the rubber grommets. (Fig C) Support the driver's side of the exhaust with a jack stand or

similar device as only the passenger's side grommets on the rear muffler are supporting the exhaust.

4. Repeat Step #3 on the passenger's side.

5. Carefully remove the factory exhaust from under the vehicle.

6. Using a small pry bar or similar device, remove the graphite donut gasket on the factory exhaust flange

upstream of the catback. This gasket is not reused during the Corsa exhaust installation. (Fig D)

Exhaust System Installation

Cat Back Exhaust System

Dual Rear Exit w/ 4.5" Pro-Series Tips

2012-15 Subaru BRZ & Scion FR-S

PN 14864 and 14864BLK