Avantone Pro CK-40 Руководство - Страница 2

Просмотреть онлайн или скачать pdf Руководство для Микрофон Avantone Pro CK-40. Avantone Pro CK-40 3 страницы. Stereo multi-pattern fet microphone

used on vocals and single instruments. The omni mode works well in incorporating some room sound into
the track. The figure 8 pattern allows 2 vocalists to use the mic at the same time from opposite sides. The
figure 8 pattern also enables the CK-40 to be used in tandem with a second CK-40 or other cardioid mic in
order to implement the M-S Stereo miking technique.
The -10d8 attenuation switch can be engaged when miking very high SPL sources to keep from overloading
the electronics.
The 80Hz HIGH-PASS filter switch can be engaged to reduce rumble and to keep unwanted low frequencies
from "muddying up" the track.
STANDARD ITEMS SUPPLIED
AVANTONE CK-40 Stereo FET Microphone
AVANTONE Custom Retro Shockmount with extra elastic bands
1X2 Splitter Box (Stereo Breakout Box)
Elegant padded genuine wooden Mic box
30' 5-pin cable
Foam wind filter
Padded Aluminum storage / travel case
Owners Manual

SPECIFICATIONS

Type:
Polar Pattern/s:
Frequency Response:
Output Impedance:
Maximum SPL :
Equivalent noise level
S/N Ratio re 1Pa :
Sensitivity
Output Connector:
High-Pass Switch
Attenuation Switch
Included Accessories:
Power Requirement:
Weight:s.
Dimensions:
Finish:
Specification and design subject to change for improvement purposes without prior notice E&OE
Stereo True Condenser
Cardioid, Omni, Figure 8 (x2)
20-20,000Hz +/- 3dB
<=250 Ohms / transformer isolated
147dB (0.5% THD @ 1000Hz)
17dB (A weighted EC651)
77dB
-40dB
Male XLR 5 pin with included breakout box and cable
80 Hz 6dB/octave
-10dB
Wood Box, Shockmount, Foam Filter, 2x1 splitter box, 30'
cable, Metal Road Case
Standard 48 Volt Phantom (x2) 3mA current consumption
.95kg / 2.1 lb
27.6cm x 49mm (10-7/8" x 1-15/16")
Polished Nickel trim / Metallic Cabernet Red Body