Lexmark 25A0452 - C 736dtn Color Laser Printer Руководство по печати - Страница 5

Просмотреть онлайн или скачать pdf Руководство по печати для Принтер Lexmark 25A0452 - C 736dtn Color Laser Printer. Lexmark 25A0452 - C 736dtn Color Laser Printer 9 страниц. Color laser printers
Также для Lexmark 25A0452 - C 736dtn Color Laser Printer: Руководство по установке модуля лотка (1 страниц), Руководство по установке модуля лотка (2 страниц), Краткая справка (2 страниц), Руководство по подключению (5 страниц), Руководство по печати (3 страниц), Брошюра и технические характеристики (6 страниц), Руководство для СМИ (3 страниц), Карта меню (3 страниц), Руководство по снабжению (2 страниц), Установка (2 страниц), Информационный справочник (1 страниц), Краткое руководство (4 страниц)

Печатать страницу
Lexmark 25A0452 - C 736dtn Color Laser Printer Руководство по печати

Print is too light

Cause
Printer may not have recalibrated recently.
Toner Darkness setting is too light, RGB Brightness setting is too
bright, or RGB Contrast setting is too high.
You are using paper that does not meet the printer specifications.
Color Saver is On.
Toner is low.
Toner cartridge is worn or defective.

Transparency print quality is poor

Cause
You are using transparencies that do not meet the printer
specifications.
Paper Type setting for the tray you are using is set to something
other than Transparency.

Gray background

Cause
Toner darkness setting is too dark.
Toner cartridge is worn or defective. Replace the toner cartridge.

Ghost images

Cause
The photoconductor is not functioning properly.
The paper weight or Paper Weight setting in the Paper Menu
is wrong for the type of paper being used.
Toner is low.
Solution
Perform Color Adjust from the Quality menu.
Turn Color Saver off in the Quality menu.
Replace the toner cartridge.
Solution
Use only transparencies recommended by the printer
manufacturer.
Make sure the Paper Type setting is set to Transparency.
Solution
Select a different toner darkness setting in the printer software before sending the job to
print.
Solution
•
•
Make sure the Paper Type and Paper Weight settings match the
type of paper that you are using.
Replace the toner cartridge.
•
Select a different Toner Darkness setting, RGB Brightness
setting, or RGB Contrast setting from Print Properties before
sending the job to print.
•
Adjust the color quality settings in the Quality menu.
•
Load paper from a new package.
•
Avoid textured paper with rough finishes.
•
Make sure the paper you load in the trays is not damp.
•
Make sure the Paper Type and Paper Weight settings match
the type of paper that you are using.
Make sure the Paper Type setting is correct for the media that
you are using.
Replace the photoconductor.
Print quality guide
Page 5 of 8