GARDEN MASTER GM2323 Инструкция по сборке Руководство - Страница 4
Просмотреть онлайн или скачать pdf Инструкция по сборке Руководство для Хранение на открытом воздухе GARDEN MASTER GM2323. GARDEN MASTER GM2323 8 страниц. Gable roof shed
Печатать страницу
STEP 2:
BACK WALL
1.
Join 3
sheets together with 2 rivets through the overlapping ribs
A
making sure the ends of the sheets are flush.
2.
Cap sheeting with
F
same as the front wall.
3.
Rivet the channels through the end ribs and every 2nd rib between.
4.
Make sure you put at least 1 rivet per sheet up through the
underside of the channel into the pan of the sheet.
GARDEN MASTER TIP
Put extra rivets in for high wind areas,
particularly on the underside.
STEP 3:
ROOF
1.
Join 3
1200mm sheets together, same as the back.
B
2.
Cap sheeting with
G
3.
Rivet the channels at every second rib but not the corners at this stage.
4.
Place the short flange of
flush with sheeting and put 1 rivet in the centre to hold the 'L'. Rivet the corners
through the channels and 1 more between the corner and the centre rivet.
Perform the same at the other end and next roof panel.
5.
Rivet
ridge beam to one roof panel and rivet
K
through internal flange and thru the ends of the
ridge beam into 'L'.
!
4
channels putting the cutouts top and bottom
2255mm channels.
'L' on top of the rib at 1 end. Make sure ends are
I
G
DIAGRAM 4
If you choose to vary from these instructions your
warranty will be impaired.
F
I
B
YOU WILL NEED:
A
3 x 1830mm sheets for the back
2 x 2255mm channels
F
F
A
YOU WILL NEED:
B
6 x 1200mm long sheets
G
4 x 2255mm channels
I
4 x 1200mm 'L's
K
1 x 2255mm ridge beam
K
G
i
If you need advice, call us
or email us at [email protected]
SCAN TO
WATCH OUR
ASSEMBLY VIDEO
HERE
I
FREE
on
0800 807 433