Lexmark 34S0409 - E 360dt B/W Laser Printer (Немецкий язык) Дополнительное руководство - Страница 5

Просмотреть онлайн или скачать pdf (Немецкий язык) Дополнительное руководство для Принтер Lexmark 34S0409 - E 360dt B/W Laser Printer. Lexmark 34S0409 - E 360dt B/W Laser Printer 9 страниц. Loading paper
Также для Lexmark 34S0409 - E 360dt B/W Laser Printer: Руководство по устранению неполадок (8 страниц), Руководство по техническому обслуживанию (10 страниц)

•

Load paper, transparencies, and card stock with the

recommended print side faceup and the top edge entering

the printer first. For more information on loading

transparencies, see the packaging the transparencies came

in.

•

Load letterhead with the logo faceup and the top edge

entering the printer first.

•

Load envelopes with the flap side down and the stamp

location in the position shown. The stamp and address are

shown to illustrate the proper orientation for loading

envelopes.

Warning—Potential Damage: Never use envelopes

with stamps, clasps, snaps, windows, coated linings, or

self-stick adhesives. These envelopes may severely

damage the printer.

Squeeze the tab located on the right width guide to adjust the

guides to lightly touch the sides of the stack.

Slide the paper gently into the multipurpose feeder until it

comes to a stop. Paper should lie flat in the multipurpose

feeder. Make sure the paper fits loosely in the multipurpose

feeder and is not bent or wrinkled.

From the printer control panel, set the Paper Size and Paper

Type.

Setting the Paper Size and

Paper Type

After you set the Paper Size and Paper Type to the correct settings

for the size and type used in the trays, then any trays containing

the same size and type are automatically linked by the printer.

Note: If the size of the paper being loaded now is the same size as

the previously loaded paper, do not change the Paper Size setting.

Make sure the printer is on and Ready appears.

From the printer control panel, press

Paper Menu appears.

Press

Press the arrow buttons until Size/Type appears, and then

press

Select Source appears.

Press the arrow buttons until the correct source appears, and

then press

Size appears under the source name.

Press