Jands DD-8 Руководство по эксплуатации - Страница 2

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Осветительное оборудование Jands DD-8. Jands DD-8 16 страниц. Opto-isolated dmx splitter

Печатать страницу
This product is approved for use in Europe and Australia/New Zealand and conforms to the following standards:
To ensure continued compliance with EMC Directive 89/336 and the Australian Radiocommunications Act 1992, use
only high quality data cables with continuous shield, and connectors with conductive backshells. Examples of such
cables are:
DMX:
©
JANDS ELECTRONICS PTY LTD 1997
All rights reserved
Information contained in this manual is subject to change without notice and does not represent a
commitment on the part of the vendor. JANDS ELECTRONICS P/L shall not be liable for any loss or
damage whatsoever arising from the use of information or any error contained in this manual.
It is recommended that all service and repairs on this product be carried out by JANDS
ELECTRONICS P/L or it's authorised service agents.
JANDS lighting products must only be used for the purpose they were intended by the manufacturer
and in conjunction with the user manual.
JANDS ELECTRONICS P/L cannot accept any liability whatsoever for any loss or damage caused by
service, maintenance or repair by unauthorised personnel, or by use other than that intended by the
manufacturer.
Manufactured in Australia by:
JANDS ELECTRONICS PTY LTD
(40 KENT RD)
LOCKED BAG 15
MASCOT
AUSTRALIA
PHONE:
FAX:
EMAIL:
Revision 2.0 - 5 July 1998
JANDS DD-8 DMX SPLITTER
EMC COMPLIANCE
European Norms
EN 50081-1
EN 50082-1
EN 60335-1
Belden 8102
NSW
1460
+61-2-9582-0909
+61-2-9582-0999
Australian / New Zealand
Standards
AS/NZS 4252.1
AS/NZS 4251.1
AS/NZS 3350.1
100% Aluminium foil screen, 65% Copper braid.
DISCLAIMER
- 2 -
ACN 001 187 837
OPERATING MANUAL