Jands Stage 12 Руководство - Страница 11

Просмотреть онлайн или скачать pdf Руководство для Музыкальный микшер Jands Stage 12. Jands Stage 12 17 страниц.

Using Master Controls

P1 and P2 Master Faders

The P1 Master fader scales the top row of Preset faders. Likewise the P2

Master fader scales the overall level of the bottom row of Preset faders. By

moving the P1 fader up while moving the P2 fader down it is possible to

crossfade between the settings on the two rows of Preset faders.

Add/Solo Master Switch

All of the Flash buttons, including those associated with both channels,

Preset master, and Grab buttons, can be set to operate in two ways. To

change the operation of the flash buttons press the Add / Solo switch. With

each press of the button the LED within the switch will change to indicate

which mode has been selected.

•

Add/Solo Fader

This fader scales the intensity of all flash buttons, including Preset and Grab

flash buttons.

While no dead blackout (DBO) facility is provided, the DBO effect can be

achieved by moving the Add/Solo fader to 0, setting the flash buttons to

Solo mode, and pressing any flash button.

Add - Indicated by the LED being OFF. Pressing a Flash button causes

that output to flash instantly to the level set by the Flash Master fader.

Solo - Indicated by the LED being ON. Pressing a Flash button causes

that output to flash instantly to the level set by the Flash Master fader,

while at the same time turning OFF all other desk outputs.