Lexmark 560n - X Color Laser Руководство по устранению неполадок
Просмотреть онлайн или скачать pdf Руководство по устранению неполадок для Принтер Lexmark 560n - X Color Laser. Lexmark 560n - X Color Laser 10 страниц. Setup sheet
Также для Lexmark 560n - X Color Laser: Руководство (13 страниц), Установочный лист (2 страниц)
Печатать страницу
Lexmark™ X560
Troubleshooting
Guide
Solving printing problems
Online customer support
Customer support is available on the Lexmark Web site at
www.lexmark.com
Checking an unresponsive
printer
If your printer is not responding, make sure:
•
The power cord is plugged into the printer and a properly
grounded electrical outlet.
•
The electrical outlet is not turned off by any switch or breaker.
•
The printer is not plugged into any surge protectors,
uninterrupted power supplies, or extension cords.
•
Other electrical equipment plugged into the outlet is working.
•
The printer is turned on.
•
The printer cable is securely attached to the printer and the
host computer, print server, option, or other network device.
Once you have checked each of these possibilities, turn the printer
off and then back on. This often fixes the problem.
Multiple-language PDFs do not
print
The documents contain unavailable fonts.
1
Open the document you want to print in Adobe Acrobat.
2
Click the printer icon.
The Print dialog appears.
3
Select Print as image.
4
Click OK.
Printer control panel display is
blank
The printer self test failed. Turn the printer off, wait about 10
seconds, and then turn the printer back on.
If Select Function does not appear, turn the printer off and
contact Customer Support.
Jobs do not print
These are possible solutions. Try one or more of the following:
M
AKE SURE THE PRINTER IS READY TO PRINT
Make sure Select Function appears on the display or the
Wake Up light is on before sending a job to print. Press Wake
Up to return the printer to Select Function.
C
HECK TO SEE IF THE PAPER TRAY IS EMPTY
Load paper in the tray.
M
AKE SURE THE CORRECT PRINTER SOFTWARE
IS INSTALLED
•
Verify that you are using the correct printer software.
•
If you are using a USB port, make sure you are running
Windows 98/ME, Windows 2000, Windows XP, or
Windows Server 2003 and using Windows 98/ME,
Windows 2000, Windows XP, or Windows Server 2003
compatible printer software.
M
AKE SURE YOU ARE USING A RECOMMENDED
USB,
,
E
PARALLEL
OR
THERNET CABLE
For more information, see the supplies section of the User's
Guide, or contact the place where you bought the printer.
M
AKE SURE PRINTER CABLES ARE SECURELY
CONNECTED
Check the cable connections to the printer and print server to
make sure they are secure.
For more information, see the setup documentation that came
with the printer.
Job takes longer than expected
to print
The job is too complex.
Reduce the complexity of your print job by eliminating the number
and size of fonts, the number and complexity of images, and the
number of pages in the job.
Tray linking does not work
Make sure to do all of the following:
•
Load both Tray 2 and Tray 3 with the same paper size and type.
•
From Print Properties, change the Paper source to Auto select.
•
Set Tray Switching to Nearest Size:
1
From the printer control panel, press System.
2
Press
or
repeatedly until Admin Menu appears,
and then press OK.
3
Press
or
repeatedly until System Settings
appears, and then press OK.
4
Press
or
repeatedly until Tray Switching
appears, and then press OK.
5
Press
or
repeatedly until Nearest Size appears,
and then press OK.
6
Press
repeatedly until Select Function appears.
Unexpected page breaks occur
1
Make sure the printer is on and Select Function appears.
2
From the printer control panel, press System.
3
Press
or
repeatedly until Admin Menu appears, and
then press OK.