Garden Sun Heater ZCV-2650 AB Руководство пользователя - Страница 15

Просмотреть онлайн или скачать pdf Руководство пользователя для Обогреватель патио Garden Sun Heater ZCV-2650 AB. Garden Sun Heater ZCV-2650 AB 16 страниц. Outdoor patio heater

Печатать страницу

CARE AND MAINTENANCE

Gas odor with extreme yellow tipping of flame.

Heater does NOT reach the desired temperature.

Heater glow is excessively uneven.

Heater makes popping noises.

Spiders and insects can nest in burner or orifices. This dangerous condition can damage heater and

render it unsafe for use. Clean burner holes by using a heavy-duty pipe cleaner. Compressed air may

help clear away smaller particles.

Carbon deposits may create a fire hazard. Clean dome and burner screen with warm soapy water if

any carbon deposits develop.

Note: In a salt-air environment (such as near an ocean), corrosion occurs more quickly than normal.

Frequently check for corroded areas and repair them promptly.

TIP:

Use high-quality automobile wax to help maintain the appearance of

your heater. Apply to exterior surfaces from the pole down. Do not

apply to emitter screen or domes.

Storage

Between uses:

Turn Control Knob OFF.

Disconnect LP source.

Store heater upright in an area sheltered from direct contact with inclement weather (such as rain,

sleet, hail, snow, dust and debris).

If desired, cover heater to protect exterior surfaces and to help prevent build-up in air passages.

Note: Wait until heater is cool before covering.

During periods of extended inactivity or when transporting:

Turn Control Knob OFF.

Disconnect LP source and move to a secure, well-ventilated location outdoors.

Store heater upright in an area sheltered from direct contact with inclement weather (such as rain,

sleet, hail, snow, dust and debris).

If desired, cover heater to protect exterior surfaces and to help prevent build-up in air passages.

Never leave LP cylinder exposed to direct sunlight or excessive heat.

Note: Wait until heater is cool before covering.

Service

Only a qualified service person should repair gas passages and associated components.

Caution: Always allow heater to cool before attempting service.