Empire DV-25-2SG Инструкции по установке и руководство пользователя - Страница 12
Просмотреть онлайн или скачать pdf Инструкции по установке и руководство пользователя для Настенные печи Empire DV-25-2SG. Empire DV-25-2SG 12 страниц. Direct vent wall furnace
Печатать страницуCleaning
The blower wheel will collect lint and could require cleaning once a
year. If the air output decreases or the noise level increases, it indicates
a dirty wheel. Complete removal of the wheel and scrubbing it with a
brush under flowing water is recommended.
Oiling
The blower motor has an oil hole located on each end of the motor. Use
#20 motor oil only. It is best to oil the motor several times during the
heating season using 2 or 3 drops each time. If the motor fails to start
and hums, it could be a tight bearing due to lack of oil. This may be
corrected by pouring kerosene in the oil holes, allowing to stand for a
few hours and then oiling properly.
PARTS LIST
Index
Part
No.
No.
Description
1
R-2090
Motor
2
632016
Motor Cushion
3
RH-036
Motor Support
4
642030
Blower Wheel
5
RH-710
Blower Housing Assembly
6
9120106
Fan Control Switch
7
872087
Heyco Bushing
8
DV-806
Switch Box
9
DV-807
Switch Box Cover
10
R-2091
Wire Assembly 19" (483mm)
11
8720161
Heyco Bushing
12
R-2099
Cord Set 72" (1.83m)
Page 12
R-2070