Avatar Technologies AWP01L Руководство пользователя - Страница 4
Просмотреть онлайн или скачать pdf Руководство пользователя для Домашняя автоматизация Avatar Technologies AWP01L. Avatar Technologies AWP01L 5 страниц. Smartplug
Печатать страницу2.3 Connecting the Smart Plug on 2.4Ghz WiFi
network
Plug the smart plug into a power socket and then hold the button down for 5 seconds
until the status LED starts flashing yellow quickly. Now the smart plug will go to the
installation mode.
Return to the app, press the right-top corner "+ "icon to Add Devices.
3.Caution
·Unplug the device prior to cleaning it. Use a dry cloth on exterior of the device. To avoid
shock hazard and/or damage to device, DO NOT get it wet or expose it to any liquids.
·Make sure the device is OFF before plugging it into an electronic plug.
·Changes or modifications not approved by the manufacturer could void the user's
authority to operate the equipment.
·Protective earthing: The ground pin must not be removed from device.
·Position for disconnection：The socket outlet shall be installed near the equipment
and shall be easily accessible. To disconnect, pull device from outlet.
·To avoid any risk or hazard that may be caused due to the end product，please
read and understand the manual before operating.
·If all of the user guide instructions and user safety tips are not followed, device
protection may be compromised due to the lack of proper operation.
4.Troubleshooting Tips
If you encounter any technical problems when using Avatar Controls Smart Plug, try
these following tips:
1. Make sure the electrical outlet the Smart Plug is connected to and works properly.
2. Make sure the appliance works properly with the app.
3. Make sure the connection between the Smart Plug and the electrical outlet is not loose.
4. If the plugged in outlet is controlled by a wall switch, make sure the wall switch is on.
If the problem persists and your Smart Plug is still under warranty, please send an email