Lexmark C 752 Руководство по установке
Просмотреть онлайн или скачать pdf Руководство по установке для Принтер Lexmark C 752. Lexmark C 752 16 страниц. Optional envelope drawer
Также для Lexmark C 752: Руководство пользователя (4 страниц), Краткая справка (2 страниц), Руководство по устранению заторов (2 страниц), Руководство по устранению заторов (5 страниц), Краткая справка (3 страниц)
Optional Envelope Drawer
The envelope tray can hold up to 60 envelopes (75 g/m2 [20 lb]). The following
envelope sizes are supported:
• 7¾
• DL
• Other
(Size can vary from 98.4 x 62 mm to 176 x 250 mm
• 9
• C5
[3.87 x 6.38 in. to 6.93 x 9.84 in.])
• 10
• B5
Disassembling the printer and options
If the printer and its options are already set up, you
must disassemble them before installing the envelope
drawer.
1
Make sure the printer is turned off and unplugged.
2
Remove any paper from the trays.
3
Remove any output options from the top of the
printer.
4
Have someone help you lift the printer off of the
options.
CAUTION:
The printer weighs 47.7 kg (105 lb)
and requires at least two people to lift
it safely.
Set the printer on a clean, flat surface.
5
Remove the optional duplex unit and any optional
500-sheet drawers above the position where you
want to install the envelope drawer.
Set them on a clean, flat surface.
© 2003 Lexmark International, Inc., All rights reserved.
P/N 15G1973
*15G1973*
E.C. 3G0195
Installing the envelope drawer
1
Unpack the envelope drawer and remove any packing material.
2
Place the drawer in the location you have chosen for your printer or install it on
another drawer.
Warning:
Note:
3
If you are installing the envelope drawer on top
of a 500-sheet drawer or a 2000-sheet drawer:
a
Align the holes in the envelope drawer with
the positioning posts on the lower drawer.
b
Lower the envelope drawer into place.
Make sure it is seated securely on the
other drawer.
4
If you are installing the envelope drawer on top
of a 2000-sheet drawer, secure them with stabilizing
screws.
a
Insert the screws through the holes next to the
positioning posts on the envelope drawer.
b
Hand-tighten the screws.
Even when fully inserted, the screws allow some
space between the drawers.
5
Finish setting up the duplex unit, the printer, and
optional mailbox or output expander as instructed in
the printer Setup Guide.
Printed in China
9/03
If you have an optional duplex unit and a 2000-sheet drawer, you
must install either one 500-sheet drawer or an optional envelope
drawer between the duplex unit and the 2000-sheet drawer.
If you have a 2000-sheet drawer, you can add either an envelope
drawer or one 500-sheet drawer, but not both.