Jandy Jandy Pro Series Руководство пользователя - Страница 10

Page 10

4.2

To Reset to the Beginning of the Color Sequence

Begin this procedure with the light turned ON.

Turn the light OFF, wait five (5) seconds, then turn ON, the light will return

to the beginning of the color cycle (Alpine White).

NOTE To synchronize colors on multiple Jandy Pro Series Nicheless

Underwater LED Light systems wired to separate switches, perform

the above actions on all of their switches simultaneously. All Jandy

Pro Series Nicheless Underwater LED Lights will synchronize

automatically if activated by the same switch. No other accessories

are required.

Section 5.

A 12-14 Volt AC Transformer must be used to power all 12-Volt lights.

NOTE For optimum performance Jandy Pro Series recommends not

exceeding the load factor specified by the instructions included with

the transformer.

To ensure maximum safety, use only a Class 2 transformer that can supply

12-14 Volts AC to power all 12-Volt lights. The transformer must be listed

or certified by a Nationally Recognized Testing Laboratory (NRTL) for the

intended use.

To prevent risk of fire which could result in property damage,

and to ensure optimum performance, do not exceed the load

factor specified in the instructions provided by the transformer

manufacturer

ENGLISH

Twelve (12) Volt Installation

CAUTION

Nicheless Underwater LED Lights | Owner's Manual