Jandy Jandy Pro Series Руководство пользователя - Страница 16

Page 16

Section 8.

8.1

1. Turn the light ON and wait for 20 seconds. The lights will first come on

white for a few seconds and then return to the color mode it was on prior

to being turned off.

2. P-Series LED Colored Nicheless Lights are specifically designed to be

operated by select Pentair

direct switching/access to colors and programs WITHOUT having to

toggle sequences ON/OFF. Please refer to Pentair and Zodiac Series

controls for installation and Operational directions.

NOTE When using the above mentioned controls - when programming the

Light Function - the general selection choice offered that should be

selected is IntelliBrite. The color and show names will be slightly

different but all operations will be correct.

NOTE At NO TIME shall the P-Series lights be used in conjunction with

any other lights. The color choices, shows and operations are

entirely different.

3. To move to another color mode, cycle the lights OFF/ON the selected

number of times listed below.

Example: If you are now on Blue (8) and want the lights to be Magenta (12), then

the lights must be turned off and on twelve (12) times to bring you to Magenta. To

move to Old School, turn OFF/ON 1 time.

During OFF/ON Cycle,

illumination will occur. During this period of time the pool/spa will be dark

and precautions should be taken to avoid unforeseen accidents. Failure

to observe this warning may result in serious injury or death to pool/spa

users.

ENGLISH

P-Series Nicheless Underwater LED

Light Operating Instructions

Controls and Zodiac Rev T.1 controls for

WARNING

before the selected mode is displayed, no

Nicheless Underwater LED Lights | Owner's Manual