Gardena PowerMax 1200/32 Руководство по эксплуатации - Страница 3
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Газонокосилка Gardena PowerMax 1200/32. Gardena PowerMax 1200/32 15 страниц. Electric lawnmower
Также для Gardena PowerMax 1200/32: Руководство по эксплуатации (9 страниц), Руководство по эксплуатации (9 страниц)
Печатать страницу
Voltage
Cable length
220 – 240 V / 50 Hz
Up to 20 m
220 – 240 V / 50 Hz
20 – 50 m
1. Mains cables and extensions are available from your
local Approved Service Centre.
2. Only use extension cables specifically designed for
outdoor use and which conform to one of the follow-
ing specifications: Ordinary rubber (60245 IEC 53),
Ordinary PVC (60227 IEC 53) or Ordinary PCP
(60245 IEC 57).
3. If the short connection lead is damaged, it must
be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid
a hazard.
Training
1. Read the instructions carefully. Be familiar with the
controls and the correct use of the machine.
2. Never allow children or people unfamiliar with these
instructions to use the machine. Local regulations can
restrict the age of the operator.
3. Never operate the machine while people, especially
children, or pets are nearby.
4. Keep in mind that the operator or user is responsible
for accidents or hazards occurring to other people or
their property.
Preparation
1. While operating the machine always wear substantial
footwear and long trousers. Do not operate the
machine when barefoot or wearing open sandals.
Avoid wearing clothing that is loose fitting or that
hanging cords or ties.
2. Thoroughly inspect the area where the machine is to
be used and remove all objects which can be thrown
by the machine.
3. Before using, always visually inspect to see that the
blade, blade bolt and the blade assembly are not
worn or damaged. Replace worn or damaged com-
ponents in set to preserve balance. Replace dam-
aged or unreadable labels.
4. Before use check the supply and extension cord for
signs of damage or aging. If the cord becomes
damaged during use, disconnect the cord from the
supply immediately. DO NOT TOUCH THE CORD
BEFORE DISCONNECTING THE SUPPLY.
Do not use the machine if the cord is damaged or
worn.
Operation
1. Operate the machine only in daylight or in good
artificial light.
2. Avoid operating the machine in wet grass.
3. Always be sure of your footing on slopes.
4. Walk, never run.
5. Mow across the face of slopes, never up and down.
6. Exercise extreme caution when changing direction on
slopes.
14
Cross section
7. Do not mow excessively steep slopes.
8. Use extreme caution when reversing or pulling the
1.5 mm
2
machine towards you.
2.5 mm
2
9. Stop the blade(s) if the machine has to be tilted for
transportation when crossing surfaces other than
grass, and when transporting the machine to and
from area to be used.
10. Never operate the machine with defective guards
or shields, or without safety devices, for example
deflectors and / or grass collector, in place.
11. Switch on the motor carefully according to instruc-
tions and with feet well away from the blade(s).
12. Do not tilt the machine when switching on the motor,
except if the machine has to be tilted for starting.
In this case, do not tilt it more than absolutely neces-
sary and lift only the part, which is away from the
operator.
13. Do not start the machine when standing in front of the
discharge opening.
14. Do not put hands or feet near or under rotating parts.
Keep clear of the discharge opening at all times.
15. Do not transport the machine while the power source
is running.
16. Stop the machine, and remove the plug from the
socket. Make sure that all moving parts have come
to a complete stop:
• whenever you leave the machine,
• before clearing blockages or unclogging chute,
• before checking, cleaning or working on the
machine,
• after striking a foreign object. Inspect the machine
for damage and make repairs before restarting and
operating the machine;
if the machine starts to vibrate abnormally
(check immediately):
• inspect for damage,
• replace or repair any damaged parts,
• check for and tighten any loose parts.
Maintenance and storage
1. Keep all nuts, bolts, and screws tight to be sure the
machine is in safe working condition.
2. Check the grass collector frequently for wear or
deterioration.
3. On machines with multi blade, take care as rotating
one blade can cause other blades rotate.
4. Be careful during adjustment of the machine to pre-
vent entrapment of the fingers between moving
blades and fixed parts of the machine.
5. Always allow the machine to cool down before
storing.
6. When servicing the blades be aware that, even
though the power source is switched off, the blades
can still be moved.
7. Replace worn or damaged parts for safety. Use only
genuine replacement parts and accessories.