Gardena 13000 aquasensor Руководство по эксплуатации - Страница 4

Печатать страницу

Gardena 13000 aquasensor Руководство по эксплуатации

Instructions for

submersible pump 7000

When you purchase your pump the swivel

feet are set to the flat suction position

(1 mm).

v For normal operation, turn the feet 180°

to 5 mm.

The pump is lifted 5 mm.

v Clear the outlet line before use.

Thermal protection switch

The pump is automatically switched off on

overheating by the built-in thermal motor

protector. After having cooled down, the

motor automatically switches on again (see

7. Trouble Shooting).

3. Initial Operation

Hose diameter

Hose connection

of universal fitting

Hose connection

Automatic deaerating valve

If the pump is half submersed, water may

come out of the ventilation holes

This is not a defect of your pump, but serves

to deaerate the pump.

13 mm ( ¹⁄₂ " )

16 mm ( ⁵⁄₈ " )

19 mm ( ³⁄₄ " )

Cut off topmost

nipple at

The following connection kits are required for 13 mm to

19 mm connections:

13 mm ( ¹⁄₂ " ):

GARDENA Pump Connection Set, Art. No. 1750

16 mm ( ⁵⁄₈ " ):

GARDENA Tap Connector, Art. No. (2)902,

and GARDENA Standard Hose Connector,

Art. No. (2)916

19 mm ( ³⁄₄ " ):

GARDENA Pump Connection Set, Art. No. 1752

Best results in delivery capacity are achieved when using 38 mm

(1 ¹⁄₂ " ) hoses.

The automatic

deaerating valve

eliminates any

air pockets in the

pump.

25 mm (1 " )

Do not cut off

Cut off top two

any nipples.

38 mm (1 ¹⁄₂ " )

nipples at