Gardena 1498 Руководство по эксплуатации - Страница 6

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Водяной насос Gardena 1498. Gardena 1498 11 страниц. Battery pump

Печатать страницу

6. Trouble-Shooting

Fault

Pump running

but does not deliver.

Pump does not start, or stops

suddenly during operation.

Pump is running

but the delivery output

drops suddenly.

Attention ! The threaded connection for the pump housing is locked. Work on the electrical

section of the pump may only be performed by GARDENA Service.

If you have any other problem, please contact our Customer Service.

7. After Operation

Preparing the battery pump

for storage:

Disposing of the battery:

Possible cause

Air cannot escape because

the pressure line is closed.

Possible kink in the pressure

hose.

Air in suction foot.

Suction foot / filter blocked.

Water level below minimum

water level when starting the

pump.

Electronic protective switch in

the Accu has switched off the

pump.

Power connection interrupted.

Suction foot / filter blocked.

Battery flat.

To prevent misuse and accidents, the battery must always

be stored disconnected from the pump.

1. Take battery pump out of the container and unplug.

2. Charge battery (see 4. Operating)

3. Store battery and pump in a dry, frost proof location, out of the

reach of children.

The battery must be stored charged to increase the life of the

battery.

These Accus contain nickel /cadmium cells. After their lifetime have

expired, they may not be disposed of as normal house rubbish,

Ni-Cd

but must be disposed of properly.

Return batteries to the dealer – or – send the batteries direct to

one of the service centres listed overleaf.

Remedy

Open the pressure line (e. g.

shut-off valve, delivery units).

Wait for about max. 60 seconds

until the pump has vented; if

necessary, turn off and then

on again.

Clean filter

(see 5. Maintenance).

Submerge pump deeper.

Minimum water depth of water is

5.5 cm.

Clean filter

(see 5. Maintenance).

Comply with the maximum tempe-

rature for media conveyed (35 °C).

Check connection cable and

electrical plug and socket

connections.

Clean the filter

(see 5. Maintenance).

Charge the battery

(see 4. Operating).