Lexmark CS510 Series Руководство - Страница 13

Просмотреть онлайн или скачать pdf Руководство для Принтер Lexmark CS510 Series. Lexmark CS510 Series 19 страниц. Color laser printer
Также для Lexmark CS510 Series: Техническая записка (3 страниц), Установочный лист (2 страниц), Руководство по качеству окраски (6 страниц), Краткое справочное руководство (15 страниц), Карта меню (3 страниц), Руководство по печати (3 страниц), Руководство по перемещению (2 страниц), Технические характеристики (2 страниц), Краткое руководство (2 страниц), Характеристики (2 страниц), Брошюра и технические характеристики (2 страниц), Руководство по эксплуатации (18 страниц)

Печатать страницу
Lexmark CS510 Series Руководство

Streaked horizontal lines appear on prints

ABCDE
ABCDE
ABCDE
Action
Step 1
a
Depending on your operating system, specify the tray or feeder from Printing
Preferences or the Print dialog.
b
Resend the print job.
Do streaked horizontal lines appear on prints?
Step 2
From the printer control panel, set the paper type and weight in the Paper menu
to match the paper loaded in the tray.
Do the paper type and weight match the paper in the tray?
Step 3
a
Load paper from a fresh package.
Note: Paper absorbs moisture due to high humidity. Store paper in its
original wrapper until you use it.
b
Resend the print job.
Do streaked horizontal lines appear on prints?
Step 4
a
Remove, and then reinstall the imaging kit.
Warning—Potential Damage: Do not expose the imaging kit to direct light
for more than 10 minutes. Extended exposure to light may cause print
quality problems.
Warning—Potential Damage: Do not touch the underside of the imaging
kit. This could damage the imaging kit.
b
Resend the print job.
Do streaked horizontal lines appear on prints?
Print quality guide
Page 13 of 18
Yes
No
Go to step 2.
The problem is solved.
Go to step 3.
Do one or more of the
following:
•
•
Go to step 4.
The problem is solved.
Go to step 5.
The problem is solved.
Specify the paper
type and weight from
the tray settings to
match the paper
loaded in the tray.
Change the paper
loaded in the tray to
match the paper type
and weight specified
in the tray settings.