Gardena 2179 Руководство по эксплуатации - Страница 5
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Триммер Gardena 2179. Gardena 2179 9 страниц. Accu telescopic hedge trimmer
Печатать страницу
GARDENA Accu Telescopic Hedge Trimmer THS 42
1. Technical data
Voltage
12 V
Rated current (idling)
2 A
Strokes
2,100 / min
Blade length
42 cm
Telescopic extension range
0 - 31 cm
Running time with Accu A 12
25 - 35 min
Weight (without Accu)
3.2 kg
Working area related emission
characteristic value L
1)
73 dB (A)
PA
Noise level L
2)
92 dB (A)
WA
Vibrations a
1)
< 2.5 dB (A)
vhw
2. Notes on operating instructions
Please read these operating in-
operating controls, their correct
structions carefully and observe
use, and the notes on safety.
the notes given.
Use the instructions to familiarise
For safety reasons, child-
A
yourself with the equipment, the
ren under 16 as well as
persons not familiar with these
3. Introduction
This Hedge Trimmer is one of
1. Accu A 12 (Art. No. 2109) as
the tools in the extensive range
the energy supply / battery
of accu-system V12 equipment
for the accu-system V12.
from GARDENA.
2. Battery Charger NL 12
Please use the following articles
(Art. No. 2105) as the charger
from the accu-system V12 pro-
for the accu-system V12.
gramme to operate this tool:
Alternatively, the Accu-Pack
AP 12 (Art.-No. 2110) can be
used as the energy supply.
4. Proper use
The GARDENA Accu Telescopic
Compliance with the instructions
Hedge Trimmer is designed for
provided by the manufacturer
trimming hedges in domestic
is a prerequisite for using the
gardens and allotments.
tool correctly.
The operating instructions also
Gardening tools for private house-
include the conditions for opera-
holds and gardens are consid-
tion, repair and maintenance.
ered unsuitable for use in public
grounds, parks, sports centres,
in agriculture or forestry.
12
G
Measuring method according to
1)
2)
EN 774
directive 2000 / 14 / EC
operating instructions should
not use this Telescopic Hedge
Trimmer.
Keep these operating instruc-
tions in a safe place.
This can be recharged using
the Battery Charger NL 12
or by the High-speed Battery
Charger SL 60 which is avail-
able as an alternative.
Important ! The High-speed
Battery Charger SL 60
(Art. No. 2100) is designed
only for charging the Accu-
Pack AP 12 (Art. No. 2110).
Attention! Because of
A
the danger of physical
injuries, this tool must not be
used for cutting lawns / grass
verges, or for cutting in the
sense of shredding for com-
posting.
5. Assembly / setting the working position
5.1 Assembly of the guide
5.3 Setting a working position
handle (fig. A)
Attention! The accu must
The three-position guide handle
A
be disconnected from
1
is mounted onto the unit and
the tool and the cutting blade
secured with 2 screws. (Captive
sheath should remain in posi-
screws integrated in the handle.)
tion when setting the working
position !
5.2 Basic working position
settings (fig. B - E)
Never take hold of the cutting
The Telescopic Hedge Trimmer
blade to turn the blade head
has three basic settings. These
or to extend the telescopic
!
§
are marked
to
on the blade
handle!
head and the handle:
Note: The cutting blade has
!
Trimming hedges from the
a total of 8 working positions
side at a distance from the
(12° increments from 0°/horizon-
standing position, eg. to reach
tal to 84° elevation).
over flower beds (fig. B / B 1).
Adjustment to any of the 5 inter-
Note:
mediate settings for the 3 work-
Telescopic handle retracted.
ing positions described above
"
For trimming extremely low
is made in the same manner.
hedges, or eg. ground blan-
The positions
kets, while standing upright
scribed above are recommended
(fig. C / C 1).
for straight forward handling.
Note: Telescopic handle
Important! Always ensure that
extended to the appropriate
the selected position snaps in
length for upright working.
correctly. Danger of injury!
§
For trimming high hedges
Select one of the basic working
up to approx. 2.5 m from
positions
the ground without the need
to the description section 5.2 and
for a ladder or scaffolding
referring to figure E, adjust the
(fig. D / D 1).
Telescopic Hedge Trimmer as
Note: Telescopic handle ex-
follows (fig. D / F/ G):
tended to the appropriate
1. (Fig. F) Adjust the length of
length. Control of the Tele-
the telescopic handle by
scopic Hedge Trimmer is
pressing and holding the ad-
within arm's reach for easier
justing button
handling (fig. D).
ing the telescopic handle to
6. Operation
(fig. H / I)
5
Insert the accu
in the re-
vent the tool being turned on by
ceptacle as illustrated in figure I.
accident. Thus both hands are
Ensure that the accu snaps in
required to operate the Hedge
correctly. Pay attention that this
Trimmer (fig. H):
audibly "clicks" into position.
1. Hold by the 3-point guide
The accu is released from the
handle
tool by simultaneously pressing
the three button switches
both of the orange coloured
2. Hold the grip
locking buttons.
hand and depress the button
switch
The Hedge Trimmer is fitted with
will then start to run.
a two-hand safety switch to pre-
the desired working length
(fig. F). The length of the tele-
scopic handle can be extended
by max. 310 mm.
2. (Fig. G 1) Press and hold the
oval pimpled button
turning the trimmer head
the axial direction into one of
the working positions
§
for example into position
for trimming the top of a high
hedge (arrow must point to
the position number – see
figure D 1).
Note: The trimmer head can
be set to one of 7 axial posi-
tions between 0° and 180°
at increments of 30°.
3. (Fig. G 2) Adjust the cutting
angle for the trimmer blade
!"
§
or
de-
by pressing and holding the
round adjusting button
adjusting the position of the
8
trimmer blade
as required.
(Our example: position
Arrow must point to the position
number – see figure D 1).
!"
§
or
according
Note: All 3 working positions
for selection can be set in this
way.
The working position has been
correctly set when the position
number indicates the selected
position (see example figure
D 1).
6
while extend-
Simply release either of these
switches in order to stop the
trimmer.
In accordance with safety regu-
lations, an additional safety device
1
and press one of
ensures that the blade motion
2
.
stops within
1 sec.
3
with the other
The projecting guide (impact
protection) prevents any kick-
4
. The Hedge Trimmer
back if the trimmer hits a solid
object.
G
7
while
A
in
!"
or
§
9
while
for working
§
.
13