Gardena 9832 Руководство по эксплуатации - Страница 4
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Триммер Gardena 9832. Gardena 9832 14 страниц. Electric hedge trimmer
Также для Gardena 9832: Руководство по эксплуатации (14 страниц)
Печатать страницу
d) Store idle power tools out of the reach of
children and do not allow persons unfamil-
iar with the power tool or these instruc-
tions to operate the power tool. Power tools
are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalign-
ment or binding of moving parts, breakage
of parts and any other condition that may
affect the power tool's operation. If dam-
aged, have the power tool repaired before
use.
Many accidents are caused by poorly main-
tained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g) Use the power tool, accessories and tool
bits etc. in accordance with these instruc-
tions, taking into account the working
conditions and the work to be performed.
Use of the power tool for operations different
from those intended could result in a hazardous
situation.
5) Service
Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts. This will ensure that the safety of the
power tool is maintained.
Hedge trimmer safety warnings:
• Keep all parts of the body away from the
cutter blade. Do not remove cut material or
hold material to be cut when blades are
moving. Make sure the switch is off when
clearing jammed material. A moment of inat-
tention while operating the hedge trimmer may
result in serious personal injury.
• Carry the hedge trimmer by the handle
with the cutter blade stopped. When trans-
porting or storing the hedge trimmer
always fit the cutting device cover. Proper
handling of the hedge trimmer will reduce pos-
sible personal injury from the cutter blades.
• Hold the power tool by insulated gripping
surfaces only, because the cutter blade
may contact hidden wiring or its own cord.
Cutter blades contacting a "live" wire may make
exposed metal parts of the power tool "live" and
could give the operator an electric shock.
• Keep cable away from the cutting area.
During operation the cable may be hidden in
shrubs and can be accidentally cut by the
blade.
4
Additional Safety Recommendations
Warning! Keep toddlers away when you assemble
the unit.
Small parts can be easily swallowed. There is also
a risk that the polybag can suffocate toddlers.
Work area safety
Only use the unit in the manner and for the
functions described in these instructions.
The operator or user is responsible for accidents
or hazards occurring to other people or their
property.
While operation and transport pay special attention
to the hazard for third parties.
Risk of stumbling. While operation pay attention to
the cable.
Warning! When wearing hearing protection,
and due to the noise produced by the unit, the
operator may not notice persons approaching.
Do not use the unit when a thunderstorm is
approaching.
Do not use the unit nearby a water.
Electrical safety
The British Standards Institute recommend the use
of a Residual Current Device (R.C.D.) with a trip-
ping current of not more than 30 mA. Check your
R.C.D. every time you use it.
Before use, examine cable for damage, replace it
if there are signs of damage or ageing.
If the replacement of the supply cord is necessary,
this has to be done by the manufacturer or his
agent in order to avoid a safety hazard.
Do not use the unit if the electric cables are
damaged or worn.
Immediately disconnect from the mains electricity
supply if the cable is cut, or the insulation is dam-
aged. Do not touch the electric cable until the
electrical supply has been disconnected.
Your electric cable must be untangled, tangled
cables can overheat and reduce the efficiency of
your unit.
Always disconnect the mains cable before
disconnecting any plug, cable connector or
extension cable.
Switch off, remove plug from mains and examine
electric supply cable for damage or ageing before
winding cable for storage. Do not repair a dam-
aged cable, send the unit to the next GARDENA
service Center or dealer authorised by GARDENA.
Always wind cable carefully, avoiding kinking.