Lexmark Interpret S400 Руководство по работе с сетью - Страница 15

Просмотреть онлайн или скачать pdf Руководство по работе с сетью для Принтер Lexmark Interpret S400. Lexmark Interpret S400 19 страниц. Network getting started guide

Печатать страницу

Click AirPort.

Click Advanced > TCP/IP or TCP/IP.

The "Router" entry is typically the wireless access point.

Type your user name and password when prompted.

Click OK.

On the main page, click Wireless or another selection where settings are stored. The SSID will be displayed.

Write down the SSID, security type and the WEP key/WPA passphrase (if shown).

Notes:

•

Make sure you copy the network information down exactly, including any capital letters.

•

Store the SSID and the WEP key or WPA passphrase in a safe place for future reference.

AKE SURE YOUR

The printer only supports wireless printing through AirPort base stations for Mac OS X 10.5 or later.

"Communication not available" message displays when printing

wirelessly

These are possible solutions. Try one or more of the following:

AKE SURE YOUR COMPUTER AND PRINTER HAVE VALID

If you are using a laptop and have power saving settings enabled, you may see the Communication not

available message on your computer screen when you attempt to print wirelessly. This can occur if the laptop

hard drive has powered down.

If you see this message, wait a few seconds and then try to print again. The laptop and printer require a few seconds

to power up again and reattach to the wireless network.

If you see this message again after you have waited long enough for the printer and the laptop to attach to the

network, there may be a problem with your wireless network.

Make sure that the laptop and printer have both received IP addresses. For more information on checking IP

addresses, see "Locating IP addresses" on page 11.

If the printer and/or the laptop does not have an IP address, or if either has an address of 169.254.x.y (where x and

y are any two numbers between 0 and 255):

Turn off the device that does not have a valid IP address (the laptop, the printer, or both).

Turn on the device(s).

Check the IP addresses again.

If the laptop and/or printer still does not receive a valid IP address, there is a problem with your wireless network.

Try the following:

•

Make sure your wireless access point (wireless router) is turned on and is working.

•

Remove any objects that could be blocking the signal.

IS COMPATIBLE WITH WIRELESS PRINTING THROUGH

Troubleshooting

ADDRESSES FOR THE NETWORK

ORT