Gardena 1187 Руководство по эксплуатации - Страница 4

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Газонное и садовое оборудование Gardena 1187. Gardena 1187 7 страниц. Soil moisture sensor

Печатать страницу

6. Notes on Use

The Soil Moisture Sensor is

The Soil Moisture Sensor mea-

fitted with a "safety switch".

sures the moisture level of the

When the moisture sensor is

soil in the roots of the plants. The

set in position 1, a switching

time it takes until the soil is suffi-

point is set ensuring the set

ciently moist or until the water

watering programs run, in case

flow is stopped by the water com-

the water container no longer

puter, depends on the intensity

contains any water (e.g. if the

of rain fall and the artificial water-

ceramic sensor is damaged).

ing. In the worst case, a watering

When set in position 2, water-

program and a rain shower may

ing is not continued if the

overlap until the required soil

water container no longer

moisture is reached.

contains any water.

7. Maintenance, Care and Storage

7.1 Storage

rinse with clean water, thoroughly

The Soil Moisture Sensor must be

clean the inside and outside of

disconnected from the connection

the water container

cable

and removed from the

Store the Soil Moisture Sensor

ground before the frosty season

over the winter in a dry, dust-free

begins. If you leave the cable out-

place away from frost.

side or under ground, close the

cable socket with the cover (on

The self-tapping screws inside

the cable). After removing the Soil

the housing and lid must not be

Moisture Sensor from the ground

unscrewed.

8. Accessory

Should the connection cable of

to a length of max. 105 m by

the Moisture Sensor be not long

using the 10 m Extension Cable,

enough it can be extended up

Art. no. 1186.

9. Faults

Fault

Possible Cause

Watering starts operation

Disadvantageous location

although soil is wet.

(Soil Moisture Sensor is not

supplied with water).

Switching point has not been

set correctly.

Defective or loose connec-

tion cable.

No water in the Soil Moisture

Sensor.

You can shorten the time it takes

for the moisture sensor to react

by reducing the installation depth

of the moisture sensor. However,

it must be ensured that the ce-

ramic sensor

still has sufficient

contact with the soil (the cera-

mic sensor must not be exposed

to the air – see point 5.2).

7.2 Care

The Soil Moisture Sensor should

be cleaned approx. every 4 months

and replaced in the soil as de-

scribed in point 5.2.

Note : Do not use harsh house-

hold cleaning agents or scouring

powder. Handle the ceramic

sensor

carefully.

Remedy

Locate the Soil Moisture Sensor

in the area to be watered.

Readjust the setting via the

turning knob

(see point 5.3.).

Check the plug-in connection for

damage and replace it, if neces-

sary (spare cable can be ordered

from the GARDENA Service).

Fill the Soil Moisture Sensor with

clean water. Screw on the cover

correctly (see point 5.2).

Watering starts operation

although soil is wet.

Watering not switched on

although it is dry.

Soil Moisture Sensor

losing water.

Soil Moisture Sensor

losing water despite

having cleaned O-ring.

Flower box watering set

running constantly in prog. 14

although the soil is moist.

If you have any problems with

your Soil Moisture Sensor, please

contact our Customer Service or

return the defective unit together

with a short description of the

problem directly to one of the

GARDENA Service Centres

listed on the back of this leaflet.

Ceramic sensor

has not

Press down and water the soil

sufficient soil contact.

around the Soil Moisture Sensor

(see point 5.2.).

Switching point is not set

Correct setting using control

correctly.

knob

Unsuitable position for sensor,

Change the location.

depression in ground, water-

logging, too much shade etc.

No water in Soil Moisture

Fill housing with water (Fig. B)

Sensor and control

and close the lid properly.

knob

set at position 2.

Control unit battery power

Exchange the battery in the

is too low.

control unit.

O-ring in lid

is dirty.

Clean O-ring.

Seal is damaged.

Send the Soil Moisture Sensor

to GARDENA Service.

Soil Moisture Sensor control

Set the control

knob

set at position 1.

knob

If covered under warranty, please

repair or if parts exchanged are

include the completed and signed

not original GARDENA parts

warranty card.

or parts approved by us, and,

if the repairs were not carried

We expressly point out that,

out by a GARDENA Service

in accordance with the product

Centre or an authorised spe-

liability law, we are not liable

cialist. The same applies to

for any damage caused by our

spare parts and accessories.

units if it is due to improper

(see point 5.3).

to position 2.