Gardena 9850 Руководство по эксплуатации - Страница 5
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Газонное и садовое оборудование Gardena 9850. Gardena 9850 12 страниц. Grass shear
Также для Gardena 9850: Руководство по эксплуатации (12 страниц)
Печатать страницу
Do not use the battery charger outdoors.
Protect the battery charger from damp or wet areas.
Only use the battery in an ambient temperature between
−10 °C and + 45 °C.
A non-functioning battery must be disposed of correctly.
It may not be sent via post. For further details, please
contact your local disposal com panies.
The battery charger should be checked regularly for signs
of damage or ageing (brittleness) and may only be used if
it is in perfect condition.
The charger unit provided may only be used to charge
the rechargeable batteries supplied with the product.
Non-rechargeable batteries must not be charged with
this battery charger (danger of fire).
The product must not be operated during charging.
After charging, disconnect the charger from the mains
and from the battery.
2. INSTALLATION
Initial Operation [ Fig. I1 ]:
DANGER! Risk of injury!
Cut injury when the product starts
accidentally.
v Before you initially operate the product, make
sure that the protective cover
blade
2
.
To charge the battery [ Fig. I2 ]:
The battery should be fully charged before using for the
first time. Charging time (see 7. TECHNICAL DATA).
The lithium-ion battery can be re-charged in any state
of charge, and the charging process can be interrupted
at any time without damaging the battery (no memory
effect).
The product cannot be started during charging.
3. OPERATION
To start the Grass Shear [ Fig. I1 / O1 ]:
DANGER! Risk of injury!
Risk of injury if the product does not stop
when you release the start button.
v Do not bypass the safety devices or switches.
For example do not attach the starting lock-out
7
or start button
to the handle.
To start:
The product is fitted with a starting lock-out
the product from being turned on by accident.
12
Only charge battery between 10 – 45 °C.
After heavy duty service allow battery to cool down
first.
Maintenance and storage
v When finishing or interrupting work push up
Keep all nuts, bolts and screws secure to be sure the
product is in safe working condition.
The product must not be stored over 35 °C or under
direct exposure to sunlight.
Do not store the product in places with static electricity.
v Ensure the correct mains voltage.
1. Connect charging cable
1
is slid over the
2. Connect battery charger
During charging, the jack
charged.
When the jack
Check the charge status regularly while charging.
3. First pull the charging cable
When there is a sharp fall in the power of the battery, the
product switches off and the battery needs to be charged.
1. Clear the area to be cut of stones and other solid
2. Remove the protective cover
3. Push the starting lock-out
6
4. Release the starting lock-out
To stop:
1. Release the start button
6
to prevent
2. Slide the protective cover
Risk of injury!
Do not touch blades.
protection cover.
CAUTION!
Incorrect mains voltage damages batteries
and the battery charger.
3
Shear.
5
4
flashes green. The battery is
4
lights up green, the battery is fully charged.
then unplug the battery charger from the electrical
socket.
objects.
7
start button
.
The product will start.
7
to the jack
4
of the Battery
to an electrical socket.
3
4
out of the jack
and
1
2
from the blade
.
6
forwards and push the
6
.
.
1
2
over the blade
.