Gardena AccuCut Li 9850 Руководство по эксплуатации - Страница 7
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Газонное и садовое оборудование Gardena AccuCut Li 9850. Gardena AccuCut Li 9850 13 страниц.
Также для Gardena AccuCut Li 9850: Руководство по эксплуатации (14 страниц), Руководство по эксплуатации (13 страниц)
Disposal:
(in accordance with
RL2012/19/EC)
8
6. TROUBLESHOOTING
1
To change the blade:
2
w
q
0
9
Problem
The jack flashes red
while charging
Runtime too low
The product must not be added to usual household waste.
Refer to local environmental laws for discarding.
The product contains lithium-ion cells that should not be discarded
with normal household waste at the end of their life.
Please return the lithium-ion cells to your GARDENA dealer or
dispose of them properly at a public recycling centre.
1. Discharge lithium-ion cells
2. Remove lithium-ion cells
3. Dispose of lithium-ion cells
DANGER! Risk of physical injury!
Cut injury when the product starts accidentally.
v B efore you troubleshoot the product, make sure that the
protective cover
2
Only an original GARDENA blade is allowed to be used.
A new blade can be ordered by the GARDENA Service.
1. Push the button
2. Remove the blade
3. If necessary clean the transmission chamber and lubricate the
excentric drive
4. Turn the excentric drive
5. Pull the crank
6. Place the new blade
the excentric drive
7. Slide the lid
Possible Cause
Allowed battery temperature
was exceeded.
Blade soiled.
8
completely.
8
from the product.
8
properly.
1
is slid over the blade
9
and slide the lid
2
.
q
with some acid-free grease (Vaseline).
q
downwards.
w
on the back side of the blade
2
on the motor product in such a way that
q
is inserted in the crank
0
upwards until it makes a click.
Remedy
v Let the battery cool down.
v Clean and lubricate scissor
2
.
0
downwards.
2
in the middle.
w
.
Restart the charging.
blade in accordance with the
maintenance instructions.
15