KitchenAid KHHC2090SBT3 Руководство по установке - Страница 5
Просмотреть онлайн или скачать pdf Руководство по установке для Микроволновая печь KitchenAid KHHC2090SBT3. KitchenAid KHHC2090SBT3 12 страниц. Microwave hood combination
Также для KitchenAid KHHC2090SBT3: Инструкции пользователя (8 страниц)
Печатать страницу
4=
Secure vent deflector with 2 mounting screws (1 on each end).
A
B
/co
4=
Position the damper assembly so that the long tab slides into
the slot on the right side of the damper vent opening, as
shown. Then secure with mounting screw.
A
B
C
A. Mounting screw
B. Damper assembly
C. Long tab (inside slot)
A. Mounting screw
B. Vent deflector
5. Replace vent screen.
Wall Venting Installation Only
To Remove Wall Damper Vent Cover:
1. Locate the wall damper vent cover on the back of the
microwave oven.
2. Using diagonal wire cutting pliers, gently snip out the damper
vent cover at the perforations.
A
B
C
D
I
oh
.....
t,
I-
/
/
A. Diagonal wire cutting pliers
B. Back of microwave
oven
C. Wall damper vent cover
D. Perforations
3. Save the cover for possible change of venting method in the
future.
Roof Venting Installation
Only
To Remove
Roof Damper Vent Cover:
1. Locate the roof damper vent cover on the top of the
microwave oven.
2. Using diagonal wire cutting pliers, gently snip out the damper
vent cover at the perforations.
A
B
C
D
A. Diagonal wire cutting priers
B. Top of microwave oven
C. Roof damper vent cover
D. Perforations
3. Save the cover for possible change of venting method in the
future.
NOTE: Do not install damper assembly at this time.