Lexmark MS810n Руководство - Страница 2

Просмотреть онлайн или скачать pdf Руководство для Принтер Lexmark MS810n. Lexmark MS810n 20 страниц. Ms810 series monochrome laser printer
Также для Lexmark MS810n: Руководство по подключению (6 страниц), Информационный справочник (1 страниц), Руководство по перемещению (3 страниц), Бумажное руководство (4 страниц), Карта меню (3 страниц), Установочный лист (2 страниц), Руководство по дефектам печати (1 страниц), Руководство (17 страниц), Руководство по печати (18 страниц), Руководство по качеству Mono (1 страниц), Характеристики продукта (2 страниц), Технические характеристики продукта (2 страниц)

Печатать страницу
Lexmark MS810n Руководство
Action
Step 2
From the printer control panel, set the paper size and type in the Paper menu
to match the paper loaded in the tray.
Do the paper size and type match the paper loaded in the tray?
Step 3
a
Depending on your operating system, specify the paper size from Printing
Preferences or from the Print dialog.
b
Resend the print job.
Is the page or image clipped?
Step 4
a
Reinstall the imaging unit.
1
Remove the toner cartridge.
2
Remove the imaging unit.
Warning—Potential Damage: Do not expose the imaging unit to direct
light for more than 10 minutes. Extended exposure to light may cause
print quality problems.
3
Install the imaging unit, and then the cartridge.
b
Resend the print job.
Is the page or image clipped?

Compressed images appear on prints

Action
Step 1
a
Make sure the size of the paper loaded in the tray matches the fuser type.
Note: To identify the fuser type, view the label on the fuser.
b
Resend the print job.
Do compressed images still appear?
Step 2
a
Replace the fuser.
For more information on installing the fuser, see the instruction sheet that
came with the part.
b
Resend the print job.
Do compressed images still appear?
Print quality Guide
Page 2 of 19
Yes
No
Go to step 3.
Do one or more of the
following:
•
•
Go to step 4.
The problem is solved.
Contact
customer
The problem is solved.
support.
Yes
No
The problem is solved.
Go to step 2.
The problem is solved.
Contact
support.
Specify the paper size
from the tray settings
to match the paper
loaded in the tray.
Change the paper
loaded in the tray to
match the paper size
specified in the tray
settings.
customer