Makita 6071DW Руководство по эксплуатации - Страница 10
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Сверло Makita 6071DW. Makita 6071DW 16 страниц. Cordless driver drill equipped with electric brake
Печатать страницуDrilling operation
0
Drilling
in
wood
When drilling in wood, best results are obtained with wood drills equipped with a guide
screw. The guide screw makes drilling easier by pulling the bit into the workpiece.
0
Drilling in metal
To prevent the bit from slipping when
starting a hole, make
an
indentation with
a centerpunch and hammer at the point
to be drilled. Place the point of the bit in
the indentation and start drilling.
Use a cutting lubricant when drilling
metals. The exceptions are
iron
and brass
which should be drilled dry.
CAUTION :
*Pressing excessively on the tool will not speed up the drilling. In fact, this excessive
pressure will only serve t o damage the tip
of
your bit, decrease the tool performance
and shorten the service life of the tool.
*There is a tremendous force exerted on the tool/bit at the time of hole breakthrough.
Hold the tool firmly and exert care when the bit begins to break through the workpiece.
0
A stuck bit can be removed simply by setting the reversing switch to reverse rotation in
order t o back out. However, the tool may back out abruptly if you do not hold
it
firmly.
Always secure small workpieces
in
a vise
or similar hold-down device.
10