Important safety instructions
This telephone can only be connected to a DEFINITY System.
The most careful attention has been devoted to quality standards in the
manufacture of your new telephone. Safety is a major factor in the design of every
set. But, safety is YOUR responsibility too.
Please read carefully the helpful tips listed below. These suggestions will enable
you to take full advantage of your new telephone. Then, retain these tips for later
use.
Warning
This equipment is NOT for residential use. It is for business systems applications
ONLY.
It will NOT operate on public networks. It cannot be used as the main telephone or
as an emergency telephone.
Use
When using your telephone equipment, the following safety precautions should
always be followed to reduce the risk of fire, electric shock, and injury to persons.
•
Read and understand all instructions.
•
Follow all warnings and instructions marked on the telephone.
•
This telephone can be hazardous if immersed in water. To avoid the
possibility of electric shock, do not use the telephone when you are wet. If
you accidentally drop the telephone into water, do not retrieve it until you
have first unplugged the line cord from the modular wall jack. Then, call
service personnel to ask about a replacement.
•
Avoid using the telephone during electrical storms in your immediate area.
There is a risk of electric shock from lightning. Urgent calls should be brief.
Even though protective measures may have been installed to limit electrical
surges from entering your business, absolute protection from lightning is
impossible.
•
If you suspect a natural gas leak, report it immediately, but use a telephone
away from the area in question. The telephone's electrical contacts could
generate a tiny spark. While unlikely, it is possible that this spark could ignite
heavy concentrations of gas.
•
Never push objects of any kind into the telephone through housing slots since
they may touch hazardous voltage points or short out parts that could result in
a risk of electric shock. Never spill liquid of any kind on the telephone. If liquid
is spilled, however, refer servicing to proper service personnel.
•
To reduce the risk of electric shock, do not disassemble this telephone. There
are no user serviceable parts inside. Opening or removing covers may
expose you to hazardous voltages. Incorrect reassembly can cause electric
shock when the telephone is subsequently used.
Service
Before cleaning, unplug the telephone from the modular wall jack. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Unplug the telephone from the modular wall jack and be sure to refer servicing to
qualified service personnel when these conditions exist :
•
If liquid has been spilled into the telephone.
•
If the telephone has been exposed to rain or water.
•
If the telephone has been dropped or the housing has been damaged.
•
If you note a distinct change in the performance of the telephone.
Hearing Aid Compatibility
The 2400-Series telephones are Hearing Aid Compatible (HAC), and thus all units
have "HAC" printed on them.
CE mark
The "CE" mark affixed to this equipment means that the unit complies with
directives located at http://support.avaya.com/elmodocs2/DoC/.
Declaration of Conformity
To download the Declaration of Conformity (DoC) for this equipment, visit
http://support.avaya.com/elmodocs2/DoC/ and click on the link for the appropriate
terminal.
SAVE THESE INSTRUCTIONS
When you see this warning symbol on the product,
!
refer to the user guide available from the web for more
information before proceeding.
User Guide
To download a free copy of the user guide and installation instructions for your
telephone, please go to:
http://www.avaya.com/support
USA
Печатать страницу