Makita 6236DWBE Руководство по эксплуатации - Страница 9
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Сверло Makita 6236DWBE. Makita 6236DWBE 20 страниц. Cordless driver drill equipped with electric brake
Также для Makita 6236DWBE: Руководство по эксплуатации (20 страниц)
Печатать страницу
OPERATION
Switch action
CAUTION:
Before inserting the batten/ cartridge into the tool, always check to see that the switch
trigger actuates properly and returns to the "OFF" position when released.
To start the tool, simply pull the trigger.
Tool speed
is
increased by increasing pres-
sure on the trigger. Release the trigger to
stop.
Switch trigger
Reversing switch action
CAUTION:
*Always check the direction of rotation before operation.
*Use the reversing switch only after the tool comes to a complete stop. Changing the
*When not operating the tool, always set the reversing switch lever to the neutral position.
direction of rotation before the tool stops may damage the tool.
This tool has a reversing switch to change
the direction of rotation. Depress the
reversing switch lever from the A side for
clockwise rotation or from the B side for
counterclockwise rotation. When the switch
lever is in the neutral position, the switch
trigger cannot be pulled.
Speed change
To change the speed, first switch off the
tool and then slide the speed change lever
to the
"11"
side for high speed or "I" side
for low speed. Be sure that the speed
change lever is set to the correct position
before operation. Use the right speed for
your job.
RevTing y i t c h y r
Clockwise
Counterclockwise
Low speed
High speed
t
Speed change lever
9