Lexmark MX310dn Краткая справка - Страница 5
Просмотреть онлайн или скачать pdf Краткая справка для Принтер Lexmark MX310dn. Lexmark MX310dn 16 страниц. Monochrome laser multifunction printer
Также для Lexmark MX310dn: Техническая записка (3 страниц), Технические характеристики (2 страниц), Технические характеристики продукта (2 страниц)
Печатать страницу
•
Load paper, transparencies, and card stock with the
recommended printable side faceup and the top edge entering
the printer first. For more information on loading
transparencies, see the packaging that the transparencies came
in.
Note: When loading A6‑size paper, make sure the
multipurpose feeder extender rests lightly against the edge
of the paper so that the last few sheets of paper remain in
place.
•
Load letterhead faceup with the top edge entering the printer
first. For two‑sided (duplex) printing, load letterhead facedown
with the bottom edge entering the printer first.
•
Load envelopes with the flap on the left side facedown.
Warning—Potential Damage: Never use envelopes with
stamps, clasps, snaps, windows, coated linings, or self‑stick
adhesives. These envelopes may severely damage the
printer.
5
5
From the printer control panel, set the paper size and paper type
in the Paper menu to match the paper or specialty media loaded
in the multipurpose feeder.
Linking and unlinking trays
Linking and unlinking trays
Note: This feature applies only in network printers.
1
Open a Web browser, and then type the printer IP address in the
address field.
Notes:
•
View the printer IP address in the TCP/IP section in the
Network/Ports menu. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to
load the Web page correctly.
2
Click Settings > Paper Menu.
3
Change the tray settings to specify the paper size and type for the
tray.
•
To link trays, make sure the paper size and type for the tray
match with that of the other tray.
•
To unlink trays, make sure the paper size or type for the tray
does not match with that of the other tray.
4
Click Submit.
Warning—Potential Damage: Paper loaded in the tray should match
the paper type name assigned in the printer. The temperature of the
fuser varies according to the specified paper type. Printing issues
may occur if settings are not properly configured.
Creating a custom name for a paper type
Using the Embedded Web Server
1
Open a Web browser, and then type the printer IP address in the
address field.
Notes:
•
View the printer IP address in the TCP/IP section in the
Network/Ports menu. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to
load the Web page correctly.